Ibrahimbegovic Adnan

Prof. Adnan Ibrahimbegovic - personal webpage

List of Publications

Books

  1. Ibrahimbegovic A., R.A. Mejia-Nava, ‘Structural Engineering: Models and Methods for Statics, Instability and Inelasticity’, Springer, (ISBN: 978-3-031-23591-7), pp. 1-532, (2023)
  2. Ibrahimbegovic A., N. Ademovic, ‘Nonlinear Dynamics of Structures Under Extreme Transient Loads’, CRC Press, (ISBN-13: 978-1138035416), pp. 1-253, (2019)
  3. Brancherie D., P. Feissel, S. Bouvier, A. Ibrahimbegovic (eds.), ‘From Microstructure Investigaions to Multiscale Modeling’, ISTE Wiley, (ISBN: 978-1-786-30259-5), pp. 1-273, (2018)
  4. Ibrahimbegovic A. (ed.), ‘Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, (ISBN 978-3-319-27994-7), pp. 1-493, (2016)
  5. Ibrahimbegovic A. (S. Dolarevic, translation), ‘Nelinearna mehanika deformabilnih tijela’, University of Sarajevo Press, (ISBN 978-9958-638-23-7), pp. 1-269, (2010)
  6. Ibrahimbegovic A., ‘Nonlinear solid mechanics: theoretical formulations and finite element solution methods’, Springer, Berlin, (ISBN 978-90-481-2330-8, E-book 978-1-4020-9793-5), pp. 1-571, (2009)
  7. Ibrahimbegovic A., M. Zlatar (eds.), ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, (ISBN : HB 978-90-481-2385-8, PB 978-90-481-2384-1, E-book 978-90-481-2386-5), pp 1-405, (2009)
  8. Ibrahimbegovic A., I. Kozar (eds.), ‘Extreme man-made and natural hazards in dynamics of structures’, Springer, Berlin, (ISBN : HB 978-1-4020-5654-3, PB 978-1-4020-5655-0, E-book  978-1-4020-5656-7) pp 1-397 (2007)
  9. Ibrahimbegovic A., ‘Mécanique non linéaire des solides déformables : Formulation théorique et résolution numérique par éléments finis’, Hermes Science Publication – Lavoisier, Paris (ISBN 2-7462-1489-X) pp 1-604  (2006)
  10. Ibrahimbegovic A., B. Brank (eds.), Multi-physics and multi-scale computer models in nonlinear analysis and optimal design of engineering structures under extreme conditions, IOS Press, Amsterdam, (ISBN 1-58803-479-0)  pp 1-407 (2005)

Peer Reviewed Journal Papers:

  1. Pires Kassab M., E.M.B. Campello, A. Ibrahimbegovic, ‘A geometrically exact thin-walled rod model with warping and stress-resultant-based plasticity obtained with a two-level computational approach’, Comp. Methods Appl. Mech. Eng., 433, 117497 (2025), DOI: 10.1016/j.cma.2024.117497
  2. Canario Gomes G., P.M. Pimenta, M. Lucci Sanchez, A. Ibrahimbegovic, ‘A fully incremental simple triangular multilayer Kirchhoff-Love shell element’, Latin American J. Solids Structures, 21, e563 (2024), DOI: 10.1590/1679-78258159
  3. Ljukovac S., A. Ibrahimbegovic, R-A. Mejia-Nava, I. Imamovic, ‘Geometrically exact 3D beam theory with embedded strong discontinuities for modeling of localized failure in bending’, Int. J. Solids Structures, 297, 112850 (2024), DOI: 10.1016/j.ijsolstr.2024.112850
  4. Suljevic S., A. Ibrahimbegovic, S. Dolarevic, ‘Hybrid stress and heat-flux formulation of thermodynamics for long-term simulations in thermo-viscoplasticity’, Int. J. Numerical Methods in Engineering, 125, e7436, (2024), DOI: 10.1002/nme.7436
  5. Ljukovac S., A. Ibrahimbegovic, I. Imamovic, R-A. Mejia-Nava, ‘Multibody dynamics system with energy dissipation by hardening and softening plasticity’, Multibody System Dynamics, 61, 131-162, (2024), DOI: 10.1007/s11044-024-09972-6
  6. Ibrahimbegovic A., R-A. Mejia-Nava, S. Ljukovac, ‘Reduced model for fracture of geometrically exact planar beam: Non-local variational formulation, ED-FEM approximation and operator split solution’, Int. J. Numerical Methods in Engineering, 125, e7368, (2024), DOI: 10.1002/nme.7369
  7. Grbcic-Erdelj S., A. Ibrahimbegovic, G. Jelenic, ‘Incompatible-mode geometrically non-linear finite element for micropolar elasticity’, Int. J. Solids Structures, 297, 112647, (2024), DOI: 10.1016/j.ijsolstr.2024.112647
  8. Hajdo E., E. Hadzalic, A. Ibrahimbegovic, ‘Buckling analysis of piles in weak single-layered soil with consideration of geometric nonlinearities’, Coupled Systems Mechanics, 13, 187-200, (2024), DOI: 10.12989/csm.2024.13.3.187
  9. Ljukovac S., A. Ibrahimbegovic, M. Cohodar-Husic ‘Time varying LQR-based optimal control of geometrically exact Reissner’s beam model’, Coupled Systems Mechanics, 13, 73-93, (2024), DOI: 10.12989/csm.2024.13.1.073
  10. Sanchez M.L., P.M. Pimenta, A. Ibrahimbegovic, ‘A simple geometrically exact finite element for thin shells—Part 1: statics’, Computational Mechanics, 72, 1119–1139, (2023), DOI: 10.1007/s00466-023-02339-2
  11. Dobrilla S., H.G. Matthies, A. Ibrahimbegovic, ‘Considerations on the identifiability of fracture and bond properties of reinforced concrete’, Int. J. Numerical Methods in Engineering, 124, 3662–3686, (2023), DOI: 10.1002/nme.7289
  12. Grozdanic G., A. Ibrahimbegovic, M. Galic, V. Divic, ‘Multiscale beam model for simulating fracture in laminated glass structure’, Engineering Fracture Mechanics, 292, 109606, (2023), DOI: 10.1016/j.engfracmech.2023.109606
  13. Tojaga V., C. Gasser, A. Kulachenko, S. Ostlund, A. Ibrahimbegovic A., ‘Geometrically exact beam theory with embedded strong discontinuities for the modeling of failure in structures. Part I: Formulation and finite element implementation’, Comp. Methods Appl. Mech. Eng., 410, 116013 (2023), DOI: 10.1016/j.cma.2023.116013
  14. Ibrahimbegovic A., H.G. Matthies, S.Dobrilla, E.Karavelic, R.A. Mejia-Nava, C.U. Nguyen, M. Sadiq Sarfaraz, A. Stanic, J. Vondrejc, ‘Synergy of stochastics and inelasticity at multiple scales: novel Bayesian applications in stochastic upscaling and fracture size and scale effects’, Springer Nature Applied Science, 4, 191, (2022), DOI: 10.1007/s42452-022-04935-y
  15. Nguyen C.U., A. Ibrahimbegovic, ‘Regularized variational formulation for nonlinear dynamics of viscoplastic plates’, Comp. Methods Appl. Mech. Eng., 397, 115146, (2022), DOI: 10.1016/j.cma.2022.115146
  16. Mejia-Nava R.A., I. Imamovic, E. Hajdo, A. Ibrahimbegovic, ‘Nonlinear instability problem for geometrically exact beam under conservative and non-conservative loads’, Int. J. Engineering Structures, 265, 114446, (2022), DOI: 10.1016/j.engstruct.2022.114446
  17. Ibrahimbegovic A., I. Rukavina, S. Suljevic, ‘Multiscale model with embedded discontinuity discrete approximation capable of representing full set of 3D failure modes for heterogeneous material with no scale separation’, Journal for Multiscale Computational Engineering, 20, Issue TBD, 1-32, (2022), DOI: 10.1615/IntJMultCompEng.2021038378
  18. Imamovic I., S. Ljukovac, A. Ibrahimbegovic, ‘Advanced approach to design of small wind turbine support structures’, Coupled Systems Mechanics, 11, 525-542, (2022)
  19. Nguyen C.U., T.V. Hoang, E. Hadzalic, S. Dobrilla, H.G. Matthies, A. Ibrahimbegovic, ‘Viscoplasticity model stochastic parameter identification: Multi-scale approach and Bayesian inference’, Coupled Systems Mechanics, 11, 411-442, (2022)
  20. Ibrahimbegovic A., R.A. Mejia-Nava, E. Hajdo, N. Limnios, Instability of (heterogeneous) Euler beam: Deterministic vs. stochastic reduced model approach, Coupled Systems Mechanics, 11, 167-198, (2022)
  21. Suljevic S., A. Ibrahimbegovic, E. Karavelic, S. Dolarevic, ‘Meso-scale based parameter identification for 3D concrete plasticity model’, Coupled Systems Mechanics, 11, 55-78, (2022)
  22. Moreno-Navarro P., A. Ibrahimbegovic, D. Damjanovic, ‘Multi-scale model for coupled piezoelectric-inelastic behavior’, Coupled Systems Mechanics, 10, 523-544, (2021)
  23. Stanic A., B. Brank, A. Ibrahimbegovic, H.G. Matthies, ‘Crack propagation simulation without crack tracking algorithm: embedded discontinuity formulation with incompatible modes’, Comp. Methods Appl. Mech. Eng., 386, 114090, (2021)
  24. Ibrahimbegovic A., R.A. Mejia-Nava, ‘Heterogeneities and material-scales providing physically-based damping to replace Rayleigh damping for any structure size’ , Coupled Systems Mechanics, 10, 201-216 (2021)
  25. Nguyen C.U., J.-L. Batoz, A. Ibrahimbegovic, ‘Notable highlights on locking-free techniques of Reissner-Mindlin plate nite elements in elastostatics’, Coupled Systems Mechanics, 10, 229-246, (2021)
  26. Ganghoffer J.F., X.N. Do, A. Ibrahimbegovic, ‘Thermodynamic formulations of the growth of solid bodies subjected to electromechanical interactions and application to bone external and internal remodeling’, Continuum Mechanics and Thermodynamics, 33(4), pp. 1567–1602, (2021)
  27. Hajdo E., R.A. Mejia Nava, I. Imamovic, A. Ibrahimbegovic, ‘Linearized Instability Analysis of Frame Structures under Non-Conservative Loads: Static and Dynamic Approach’, Coupled Systems Mechanics, 10, 79-102, (2021)
  28. Elhoucin M., S. Mamouri, R. Kouli, A. Ibrahimbegovic, An efficient implicit time stepping scheme for nonlinear dynamics analysis of 3D geometrically exact beam using exponential mapping, Mechanics of Advanced Materials and Structures, 28, (2021), https://doi.org/10.1080/15376494.2021.1994062
  29. Mejia Nava R.A., A. Ibrahimbegovic, N. Domnguez Ramrez, E. Flores Mendez, ‘Viscoelastic behavior of concrete structures subject to earthquake’, Coupled Systems Mechanics, 10, 265-287, (2021)
  30. A. Ibrahimbegovic, H.G. Matthies, E. Karavelic ‘Reduced model of macro-scale stochastic plasticity identification by Bayesian inference in application to quasi-brittle failure of concrete’, Comp. Methods Appl. Mech. Eng., 372, 113428, (2020)
  31. Nguyen C.U., A. Ibrahimbegovic, ‘Hybrid-stress triangular finite element with enhanced performance for statics and dynamics’, Comp. Methods Appl. Mech. Eng., 372, 113381, (2020)
  32. Čarija J., M. Nikolić, A. Ibrahimbegovic, Ž. Nikolic, ‘Discrete softening-damage model for fracture process representation with embedded strong discontinuities’, Engineering Fracture Mechanics, 236, 107211, (2020)
  33. Sarfaraz M.S., B. Rosic, H.G. Matthies, A. Ibrahimbegovic, ‘Bayesian stochastic multi-scale analysis via energy consideration’, Advanced Model. Simulation Eng. Science, 7, 50-85, (2020)
  34. Grbcic S., G. Jelenic, A. Ibrahimbegovic, ‘Geometrically non-linear 3D finite-element analysis of micropolar continuum’, Int. J. Solids Structures, 202, 745-764, (2020)
  35. Saksala T., A. Ibrahimbegovic, ‘Thermal shock weakening of granite rock under dynamic loading:
    3D numerical modelling based on embedded discontinuity finite elements’, Int. Journal for Numerical and Analytical Methods in Geomechanics, 44, 1788-1811, (2020)
  36. Karavelic E., H.G. Matthies, A. Ibrahimbegovic, ‘Machine-Learning-Based Reduced Order Model for Stochastic Plasticity’, ERCM News, 122, 21-22, (2020)
  37. Nguyen C.U., A. Ibrahimbegovic, ‘Visco-plasticity stress-based solid dynamics formulation and time-stepping algorithms for stiff case’, Int. J. Solids Structures, 196-197, 154-170, (2020)
  38. Moreno-Navarro P., A. Ibrahimbegovic, A. Ospina, ‘Multi-field variational formulations and mixed finite element approximations for electrostatics and magnetostatics’, Computational Mechanics, 65(1),  41-59 (2020)
  39. Hadzalic E., A. Ibrahimbegovic, S. Dolarevic, ‘3D thermo-hydro-mechanical coupled discrete beam lattice model of saturated poro-plastic medium’, Coupled Systems Mechanics, 9, 113-134, (2020)
  40. Ademovic N, A. Ibrahimbegovic, ‘Review of resilience-based design’, Coupled Systems Mechanics, 9, 92-112, (2020)
  41. Maknun I.J., I. Katili, A. Ibrahimbegovic, A.M. Katili, ‘A new triangular shell element for composites accounting for shear deformation’, Composite Structures, 243, 112-125, (2020)
  42. El Houcine M., S. Mamouri, A. Ibrahimbegovic, ‘Progressive Collapse of 2D Reinforced Concrete
    Structures under Sudden Column Removal’, Frontiers of Structural and Civil Engineering, https://doi.org/10.1007/s11709-020-0645-0, (2020)
  43. Boujelben A., A. Ibrahimbegovic, E. Lefrancois, ‘An efficient computational model for fluid-structure interaction in application to large overall motion of wind turbine with flexible blades’, Applied Mathematical Modelling 77, 392–407, (2020)
  44. Mejia Nava A.R., A. Ibrahimbegovic, R. Lozano, ‘Instability phenomena and their control in statics and dynamics: Application to deep and shallow truss and frame structures’, Coupled Systems Mechanics, 9, 47-62, (2020)
  45. Hajdo E., A. Ibrahimbegovic, S. Dolarevic, ‘Buckling analysis of complex structures with refined model built of frame and shell finite elements’, Coupled Systems Mechanics, 9, 29-46, (2020)
  46. Rukavina T., A. Ibrahimbegovic, I. Kozar, ‘Fiber-reinforced brittle material fracture models capable of capturing a complete set of failure modes including fiber pull-out’, Comp. Methods Appl. Mech. Eng., 355, 157-192, (2019)
  47. Karavelic E., A. Ibrahimbegovic, S. Dolarevic, ‘Multi-surface plasticity model for concrete with 3D hardening/softening failure modes for tension, compression and shear’, Computers and Structures, 221, 74-90, (2019)
  48. Imamovic I., A. Ibrahimbegovic, E. Hajdo, ‘Geometrically exact initially curved Kirchhoff’s planar elasto-plastic beam’, Coupled Systems Mechanics, 8, 537-553, (2019)
  49. Rukavina T., A. Ibrahimbegovic, I. Kozar, ‘Multi-scale representation of plastic deformation in fiber-reinforced materials: application to reinforced concrete’, Latin American Journal of Solids and Structures, 25, 1-11, (2019)
  50. Rukavina I., A. Ibrahimbegovic, X.-N. Do, D. Markovic, ‘ED-FEM multi-scale computation procedure for localized failure’, Coupled Systems Mechanics, 8, 111-127, (2019)
  51. Hadzalic E., A. Ibrahimbegovic, S. Dolarevic, ‘Acoustic fluid-structure interaction with structure built of saturated porous media capable of predicting localized failure with cracks’, Computers Structures, 214, 73-93, (2019)
  52. Karavelic E., M. Nikolic, Ibrahimbegovic A., Kurtovic A., ‘Concrete meso-scale model with full set of 3D failure modes with random distribution of aggregate and cement phase. Part I: Formulation and numerical implementation’, Comp. Methods Appl. Mech. Eng., 344, 1051-1072, (2019)
  53. Do X.N., A. Ibrahimbegovic, ‘2D continuum viscodamage-embedded discontinuity model with second order mid-point scheme’, Coupled Systems Mechanics, 7, 669-690, (2018)
  54. Hadzalic E., A. Ibrahimbegovic, S. Dolarevic, ‘Fluid-structure interaction system predicting both internal pore pressure and outside hydrodynamic pressure’, Coupled Systems Mechanics, 7, 659-668, (2018)
  55. Imamovic I., A. Ibrahimbegovic, E. Mesic, ‘Coupled testing-modeling approach to ulitmate state computation of steel structures with connections for statics and dynamics’, Coupled Systems Mechanics, 7, 555-581, (2018)
  56. Katili I., I. Jauhari Maknun, J-L. Batoz, A. Ibrahimbegovic, ‘Shear deformable shell element DKMQ24 for composite structures’, Composite Structures, 202, 182-200, (2018)
  57. Nikolic M., Do X.N., Ibrahimbegovic A., Nikolic Z., ‘Crack propagation in dynamics by embedded strong discontinuity approach: Enhanced solid versus discrete lattice model’, Comp. Methods Appl. Mech. Eng., 340, 480–499, (2018)
  58. Boujelben A., A. Ibrahimbegovic, ‘Conserving and decaying time-integration algorithms for nonlinear dynamics of 3D finite strain solids with rotations’, Comptes Rendus de l’Académie des sciences, Mecanique, 346, 571-580, (2018)
  59. Grbcic A., A. Ibrahimbegovic, G. Jelenic, ‘Variational formulation of micropolar elasticity using 3D hexahedral finite-element interpolation with incompatible modes’, Computers Structures, 205, 1-14, (2018)
  60. Kozar I., T. Rukavina, A. Ibrahimbegovic, ‘Method of incompatible modes – overview and application, Gradevinar, 70, 19-29, (2018)
  61. Ibrahimbegovic, A., Boujelben, A., ‘Long-term simulation of wind turbine structure for distributed loading describing long-term wind loads for preliminary design’, Coupled Systems Mechanics, 7, 233-254, (2018)
  62. Sarfaraz S.M., Rosic B.V, Matthies H.G., Ibrahimbegovic, A., ‘Stochastic Upscaling via Linear Bayesian Updating’, Coupled Systems Mechanics, 7, 211-231, (2018)
  63. El Houcine M., Mamouri S., Ibrahimbegovic A., ‘A controlled destruction and progressive collapse of 2D reinforced concrete frame’, Coupled Systems Mechanics, 7, 111-139, (2018)
  64. Kožar, I., Ibrahimbegovic, A. and Rukavina, T., “Material model for load rate sensitivity”, Coupled Systems Mechanics, 7, 141-162, (2018)
  65. Moreno-Navarro P., A. Ibrahimbegovic, J.L. Perez-Aparicio, ‘Linear elastic mechanical system interacting with coupled thermo-electro-magnetic fields’, Coupled Systems Mechanics, 7, 5-25, (2018)
  66. Hadzalic E., A. Ibrahimbegovic, M. Nikolic, ‘Failure mechanisms in coupled poro-plastic medium’, Coupled Systems Mechanics, 7, 43-59, (2018)
  67. Hadzalic E., A. Ibrahimbegovic, S. Dolarevic, ‘Failure mechanisms in coupled soil-foundation systems’, Coupled Systems Mechanics, 7, 27-42, (2018)
  68. Nikolic M., E. Karavelic, A. Ibrahimbegovic, P. Miscevic, ‘Lattice element models and their peculiarities’, Archives of Computational Methods in Engineering, 25, 753–784, (2018)
  69. Boujelben A., A. Ibrahimbegovic, ‘Finite-strain three-dimensional solids with rotational degrees of freedom: non-linear statics and dynamics’, Adv. Modeling Simulation Eng. Sciences, 4 :3, 1-24, (2017)
  70. Imamovic I., A. Ibrahimbegovic, E. Mesic, ‘Nonlinear kinematics Reissner’s beam with combined hardening/softening elastoplasticity’, Computers Structures, 189, 12-20, (2017)
  71. Do X.N., A. Ibrahimbegovic, D. Brancherie, ‘Dynamics framework for 2D anisotropic continuum-discrete damage model for progressive localized failure of massive structures, Computers Structures, 183, 14-26, (2017)
  72. Moreno-Navarro P., A. Ibrahimbegovic, J.L. Perez-Aparicio, ‘Plasticity coupled with thermo-electric fields: Thermodynamics framework and finite element method computations’, Computer Methods in Applied Mechanics and Engineering, 315, 50-72, (2017)
  73. Ibrahimbegovic A., C. Kassiotis, R. Niekamp, ‘Fluid-structure interaction problems solution by operator split methods and efficient software development by code-coupling’, Coupled Systems Mechanics, 5, 145-156, (2016)
  74. Saksala T., D. Brancherie, A. Ibrahimbegovic, ‘Numerical modeling of dynamic rock fracture with a combined 3D continuum viscodamage-embedded discontinuity model’, International Journal for Numerical and Analytical Methods in Geomechanics, 40, 1339-1357, (2016)
  75. Mamouri S., R. Kouli, A. Benzegaou, A. Ibrahimbegovic, ‘Implicit controllable high-frequency dissipative scheme for nonlinear dynamics of 2D geometrically exact beam’, Nonlin. Dynamics, 84, 1289-1302, (2016)
  76. Nikolic M., A. Ibrahimbegovic, P. Miscevic, ‘Discrete element model for the analysis of fluid-saturated fractured poro-plastic medium based on sharp crack representation with embedded strong discontinuities’, Computer Methods in Applied Mechanics and Engineering, 298, 407-427, (2016)
  77. Nikolic M., T. Roje-Bonacci, A. Ibrahimbegovic, ‘Overview of the numerical methods for the modelling of rock mechanics problems’, Technical Gazette, 23, 621-637, (2016)
  78. Imamovic I., A. Ibrahimbegovic, C. Knopf-Lenoir, E. Mesic, Plasticity-damage model parameters identification for structural connections, Coupled Systems Mechanics, 4, 337-364, (2015)
  79. Mamouri S., M. Elhoucine, A. Ibrahimbegovic, ‘Study of geometric non-linear instability of 2D frame structures’, European J. Computational Mechanics, 24, 246-258, (2015)
  80. Do X.N., A. Ibrahimbegovic, D. Brancherie, ‘Localized failure in damage dynamics’, Coupled Systems Mechanics, 4, 211-235, (2015)
  81. Štambuk-Cvitanović N., M. Nikolic, A. Ibrahimbegovic, ‘Influence of specimen shape deviations on uniaxial compressive strength of limestone and similar rocks’, Int. Journal for Rock Mechanics and Mining, 80, 357-372, (2015)
  82. Do X.N., A. Ibrahimbegovic, D. Brancherie, ‘Combined hardening and localized failure with softening plasticity in dynamics’, Coupled Systems Mechanics, 4, 115-136, (2015)
  83. Marenic E., A. Ibrahimbegovic, ‘Homogenized elastic properties of graphene for moderate deformations’, Coupled Systems Mechanics, 4, 137-155, (2015)
  84. Nikolic M., A. Ibrahimbegovic, ‘Rock mechanics capable of representing heterogeneities and full set of 3D failure mechanisms’, Computer Methods in Applied Mechanics and Engineering, 290, 209-229, (2015)
  85. Nikolic M., A. Ibrahimbegovic, P. Miscevic, ‘Brittle and ductile failure of rocks: embedded discontinuity approach for representing mode I and mode II failure mechanisms’, Int. J. Numerical Methods Engineering, 102, 1507-1526, (2015)
  86. Saksala T., D. Brancherie, I. Harari, A. Ibrahimbegovic, ‘Rate-dependent continuum damage-embedded discontinuity model for explicit dynamic analyses of fracture in quasi-brittle materials’, Int. J. Numerical Methods Engineering, 101, 230-250, (2015)
  87. Ngo V.M., D. Brancherie, A. Ibrahimbegovic, ‘Softening behavior of quasi-brittle material under full thermo-mechanical coupling condition: Theoretical formulation and finite element implementation’, Computer Methods Applied Mechanics and Engineering, 281, 1-28 (2014)
  88. Friedman N., G. Farkas, A. Ibrahimbegovic, ‘Parametric study of the elementary segment of an antiprismatic pop-up deployable lattice column’, YBL Journal of Built Environment, 2, 65-86, (2014)
  89. Ngo V.M., A. Ibrahimbegovic, D. Brancherie, ‘Stress-resultant model and finite element analysis of reinforced concrete frames under combined mechanical and thermal loads’, Coupled Systems Mechanics, 3, 111-144, (2014)
  90. Mamouri S., F. Hammadi, A. Ibrahimbegovic, ‘Decay/Conserving implicit scheme and Nonlinear Instability Analysis of 2D Frame Structures’, International Journal of Nonlinear Mechanics, 67, 144-152, (2014)
  91. Jukic M., B. Brank, A. Ibrahimbegovic, ‘Failure analysis of reinforced concrete frames by beam finite element that combines damage, plasticity and embedded discontinuity’, Engineering Structures, 75, 507-527, (2014)
  92. Ngo V.M., A. Ibrahimbegovic, E. Hajdo, ‘Nonlinear instability problems including localized plastic failure and large deformations for extreme thermomechanical load, Coupled Systems Mechanics, 3, 89-110, (2014)
  93. Niekamp R., A. Ibrahimbegovic and H.G. Matthies, ‘Formulation, Solution and CTL Software for Coupled Thermomechanics Systems’, Coupled Systems Mechanics, 3, 1-25, (2014)
  94. Jehel P., P. Leger, A. Ibrahimbegovic, ‘Initial versus tangent stiffness-based Rayleigh damping in inelastic time history seismic analyses’, Earthquake Engineering Structural Dynamics, 43, 467-484, (2014)
  95. Bui V.N., V.M. Ngo, M. Nikolic, D. Brancherie, A. Ibrahimbegovic, ‘Enriched Timoshenko beam finite element for modeling bending and shear failure of reinforced concrete frames’, Computers and Structures, 143, 9-18, (2014)
  96. Saksala T., A. Ibrahimbegovic, ‘Anisotropic viscodamage-viscoplastic consistency constitutive model with a parabolic cap for rocks with brittle and ductile behavior’, International Journal of Rock Mechanics and Mining Sciences, 70, 460-473, (2014)
  97. Ibrahimbegovic A., R. Niekamp, C. Kassiotis, D. Markovic, H. Matthies, ‘Code-coupling strategy for efficient development of computer software in multiscale and multiphysics nonlinear evolution problems in computational mechanics’, Advances in Engineering Software, 72, 8-17, (2014)
  98. Ibrahimbegovic A., E. Hajdo, S. Dolarevic, ‘Linear instability or buckling problems for mechanical and coupled thermomechanical extreme conditions’, Coupled Systems Mechanics, 2, 349-374, (2013)
  99. Friedman N., A. Ibrahimbegovic, ‘Overview of highly flexible, deployable lattice structures used in architecture and civil engineering undergoing large displacement‘,Ybl Journal of Built Environment, 1, 85-103, (2013)
  100. Ngo V.M., A. Ibrahimbegovic, D. Brancherie, ‘Model for localized failure with thermo-plastic coupling: theoretical formulation and ED-FEM implementation’, Computers and Structures, 127, 2-18, (2013)
  101. Bohinc U., A. Ibrahimbegovic, B. Brank, ‘Discretization error for the Discrete Kirchhoff plate finite element approximation’, Computer Methods in Applied Mechanics and Engineering, 269, 415-436, (2013)
  102. Marenic E., A. Ibrahimbegovic, J. Soric, P.A. Guidault, ‘Homogenized Elastic Properties of Graphene for Small Deformations’, Materials 6, 3764-3782, (2013)
  103. Ngo V.M., A. Ibrahimbegovic, D. Brancherie, ‘Continuum damage model for thermo-mechanical coupling in quasi-brittle materials’, Int. J. Engineering Structures, 50, 170-178, (2013)
  104. Jukic M., B. Brank, A. Ibrahimbegovic, ‘Embedded discontinuity finite element formulation for failure analysis of planar reinforced concrete beams and frames’, Int. J. Engineering Structures, 50, 115-125, (2013)
  105. Friedman N., M. Weiner, G. Farkas, I. Hegedus, A. Ibrahimbegovic, ‘On the snap-back behavior of a self-deploying antiprismatic column during packing’, Int. J. Engineering Structures, 50, 74-89, (2013)
  106. Ayhan B., P. Jehel, D. Brancherie, A. Ibrahimbegovic, ‘Coupled Damage-Plasticity Model for Cyclic Loading Applications: Theoretical Formulation and Numerical Implementation’, Int. J. Engineering Structures, 50, 30-42, (2013)
  107. Medic S., S. Dolarevic, A. Ibrahimbegovic, ‘Beam Model Refinement and Model Reduction’, Int. J. Engineering Structures, 50, 158-169, (2013)
  108. Pham B.H., D. Brancherie, L. Davenne, A. Ibrahimbegovic, ‘Stress-resultant models for ultimate load analysis of reinforced concrete frames and its multi-scale parameter estimates’, Computational Mechanics, 51, 347-360, (2013)
  109. Dujc J., B. Brank, A. Ibrahimbegovic, ‘Stress-hybrid quadrilateral finite element with embedded strong discontinuity for failure analysis of plane stress solids’, Int. J. Numer. Methods Eng., 94, 1075-1097, (2013)
  110. Dominguez N., A. Ibrahimbegovic, ‘A non-linear thermodynamical model for steel-concrete bonding’, Computers and Structures, 106/107, 29-45, (2012)
  111. Ibrahimbegovic A., H.G. Matthies, ‘Probabilistic Multiscale Analysis of Inelastic Localized Failure in Solid Mechanics’, Computer Assisted Methods in Engineering and Science, 19, 277–304, (2012)
  112. Marenic E., J. Soric, A. Ibrahimbegovic, ‘Adaptive modelling in atomistic-to-continuum multiscale methods’, Int. J. Serbian Society of Comp. Mech., 6, pp. 169-198 (2012)
  113. Hautefeuille M., J.B. Colliat, A. Ibrahimbegovic, H. Matthies, P. Villon, ‘Multiscale approach to modeling inelastic behavior with softening’, Computer and Structures, 94/95, 83-95, (2012)
  114. Benkemoun N., A. Ibrahimbegovic, J.B. Colliat, ‘Anisotropic constitutive model of plasticity capable of accounting for details of meso-structure of two-phase composite material‘, Computers and Structures, 90/91, 153-162 (2012)
  115. Casaux G., A. Ibrahimbegovic, ‘On multi-fiber beam model with coupled axial and bending response’, European Journal of Computational Mechanics, 20, 411-426 (2011)
  116. Dujc J., B. Brank, A. Ibrahimbegovic, ‘Quadrilateral finite element with embedded strong discontinuity for failure analysis of solids’, Computer Modelling in Engineering Science, 69, 223-258 (2011)
  117. Friedman N., G. Farkas, A. Ibrahimbegovic, ‘Deployable/retractable structures towards sustainable developments’, Pollack Periodica: International Journal for Engineering and Information Science, 6, 85-97 (2011)
  118. Kassiotis C., A. Ibrahimbegovic, R. Niekamp, H. Matthies, ‘Partitioned solution to nonlinear fluid-structure interaction problems. Part II: CTL based software implementation with nested parallelization’, Computational Mechanics, 47, 335-357, (2011)
  119. Kassiotis C., A. Ibrahimbegovic, R. Niekamp, H. Matthies, ‘Partitioned solution to nonlinear fluid-structure interaction problems. Part I: implicit coupling algorithms and stability proof’, Computational Mechanics, 47, 305-323, (2011)
  120. Ibrahimbegovic A., A. Boulkertous, L. Davenne, M. Muhasilovic, A. Pokrklic, ‘On modeling of fire resistance tests on concrete and reinforced-concrete structures’, Computers and Concrete, vol 7. No. 4, 285-301, (2010)
  121. Pham B.H., L. Davenne, D. Brancherie, A. Ibrahimbegovic, ‘Stress-resultant model for ultimate load behavior of reinforced-concrete frames. Combined effect of axial force and bending failure’, Computers and Concrete, vol 7, no 4, 303-315, (2010)
  122. Jehel P., L. Davenne, A. Ibrahimbegovic, P. Leger, ‘Towards robust viscoelastic-plastic-damage model with different hardening-softening capable of representing salient phenomena in seismic loading applications’, Computers and Concrete, vol 7. No. 4, 365-386, (2010)
  123. Dujc J., B. Brank, A. Ibrahimbegovic, D. Brancherie, ‘An embedded crack model for failure analysis of concrete solids’, Computers and Concrete, vol 7. No. 4, 331-346, (2010)
  124. Dominguez N., M.A. Fernandez, A. Ibrahimbegovic, ‘Enhanced solid element for modelling of reinforced-concrete structures with bond slip’, Computers and Concrete, vol 7. No. 4, 347-364, (2010)
  125. Ibrahimbegovic A., L. Davenne, J.B. Colliat, D. Brancherie, ‘Computational mechanics of integrity and durability in extreme environment for concrete and reinforced concrete structures’, IACM Expressions, 27, 7-13, (2010)
  126. Matthies H.G., R. Niekamp, M. Hautefeuille, D. Jurgens, C. Kassiotis, T. Srisupattarawanit, J.B. Colliat, A. Ibrahimbegovic, Elements of a Computational Framework for Coupled Simulations, GAMM-Mitt. Mechanics and Mathematics, 33, 73 – 78 (2010)
  127. Kassiotis C., A. Ibrahimbegovic, H. Matthies, ‘Partitioned solution to fluid-structure interaction problem in application to free-surface flow’, European Journal of Mechanics, Part B: Fluids, 29, 510-521, (2010)
  128. Ibrahimbegovic A., A. Boulkertous, L. Davenne, D. Brancherie, ‘Modeling of reinforced-concrete structures providing crack-spacing based on XFEM, ED-FEM and novel operator split solution procedure, International Journal for Numerical Methods in Engineering, 83, 452-481, (2010)
  129. Dujc J., B. Brank, A. Ibrahimbegovic, ‘Multi-scale computational model for failure analysis of metal frames that includes softening and local buckling’, Computer Methods in Applied Mechanics and Engineering, vol. 199, 1371-1385, (2010)
  130. Kassiotis C., A. Ibrahimbegovic, H.G. Matthies and B. Brank, ‘Stable splitting scheme for general form of associated plasticity including different scales of space and time’, Computer Methods in Applied Mechanics and Engineering, vol.199, 1254-1264, (2010)
  131. Benkemoun N., M. Hautefeuille, J.-B. Colliat and A. Ibrahimbegovic ‘Failure of heterogeneous materials: 3D meso-scale FE models with embedded discontinuities’, International Journal for Numerical Methods in Engineering, 82, 1671-1688, (2010)
  132. Brank B., A. Ibrahimbegovic, U. Bohinc, ‘On prediction of 3D stress state in elastic shell by higher-order shell formulations’, Computer Modelling in Engineering Science, vol. 33, 85-108 (2009)
  133. Ibrahimbegovic A., B. Brank, ‘Recent developments in nonlinear shell theory with finite rotations and finite deformations’, International Journal of Engineering Modeling, 21, 1-14 (2009)
  134. Brancherie D., A. Ibrahimbegovic, ‘Novel anisotropic continuum-discrete damage model capable of representing localized failure of massive structures. Part I : theoretical formulation and numerical implementation’, International Journal of Engineering Computations, 26, 100-127 (2009)
  135. Kucerova A., D. Brancherie, A. Ibrahimbegovic, J. Zeman, Z. Bittnar, ‘Novel anisotropic continuum-discrete damage model capable of representing localized failure of massive structures. Part II: identification from tests under heterogeneous stress field, International Journal of Engineering Computations, 26, 128-144 (2009)
  136. Ibrahimbegovic A., G. Herve, P. Villon, ‘Nonlinear impact dynamics and field transfer suitable for parametric design studies’, International Journal of Engineering Computations, 26, 185-204 (2009)
  137. Kassiotis C., J.B. Colliat, A. Ibrahimbegovic, H. Matthies, ‘Multiscale in time and stability analysis of operator split solution procedure applied to thermomechanical problems’, International Journal of Engineering Computations, 26, 205-223 (2009)
  138. Hautefeuille M., S. Melnyk, J.B. Colliat, A. Ibrahimbegovic, ‘Probabilistic aspects of localized failure of massive heterogeneous structures’, International Journal of Engineering Computations, 26, 166-184 (2009)
  139. Markovic D., A. Ibrahimbegovic, K.C. Park , ‘Model reduction strategy for transient analysis of large structures with inelastic behavior’, International Journal of Engineering Computations, 26, 45-68 (2009)
  140. Bohinc U., A. Ibrahimbegovic, B. Brank, ‘Model adaptivity for finite element analysis for thick and thin plates’, International Journal of Engineering Computations, 26, 69-99 (2009)
  141. Niekamp R., D. Markovic, A. Ibrahimbegovic, H. G. Matthies, R.L. Taylor, ‘Multi-scale modeling of heterogeneous structures with inelastic constitutive behavior. Part II : Software coupling and implementation aspects‘, International Journal of Engineering Computations, 26, 6-28 (2009)
  142. Brancherie D., P. Villon, A. Ibrahimbegovic, ‘On a consistent field transfer in nonlinear inelastic analysis and ultimate load computations’, Computarional Mechanics, 42, 213-226 (2008)
  143. Ibrahimbegovic A., P. Jehel, L. Davenne, ‘Coupled damage-plasticity constitutive model and direct stress interpolation’, Computational Mechanics, 42, 1-11 (2008)
  144. Ibrahimbegovic A., ‘Nonlinear Transient Analysis and Parametric Design Studies of Complex Engineering Structures Under Impact by a Large Airplane’, Int. J. Serbian Society of Comp. Mech., 1, 42-61 (2007)
  145. Ibrahimbegovic A., S. Melnyk, ‘Embedded discontinuity finite element method for modeling of localized failure in heterogeneous materials with structured mesh: an alternative to extended finite element method’, Computational Mechanics, 40, 149-155 (2007)
  146. Colliat J.B., M. Hautefeuille, A. Ibrahimbegovic, H.G. Matthies, ‘Stochastic approach to quasi-brittle failure and size effect’, Comptes Rendus de l’Academie des Sciences, Part II: Mécanique, 335, 430-435, (2007)
  147. Markovic D., K.C. Park, A. Ibrahimbegovic, ’Reduction of substructural interface degrees-of-freedom in flexibility based component mode synthesis’‘, International Journal for Numerical Methods in Engineering, 70, 163-180 (2007)
  148. Dolarevic S., A. Ibrahimbegovic, ‘A modified three-surface elasto-plastic cap model and its numerical implementation’, Computers and Structures, 85, 419-430 (2007)
  149. Markovic D., A. Ibrahimbegovic, ‘Complementary energy based FE modeling of coupled elasto-plastic and damage behavior for continuum microstructure computations’, Computer Methods in Applied Mechanics and Engineering, 195, 5077-5093 (2006)
  150. Ragueneau F., N. Dominguez, A. Ibrahimbegovic, ‘Thermodynamics-based constitutive model for cohesive brittle materials: Application to bond slip in RC structures’, Computer Method Applied Mechanics and Engineering, 195, 7249-7263 (2006)
  151. Colliat J.B., A. Ibrahimbegovic, L. Davenne, ‘Heat conduction and radiation heat exchange in cellular structures using flat shell elements’, Communication in Numerical Methods in Engineering, 22, 167-180 (2006)
  152. Delaplace A., A. Ibrahimbegovic, ‘Time-integration schemes for dynamic fracture problem using the discrete model’, International Journal for Numerical Methods in Engineering, 65, 1527-1544, (2006)
  153. Hervé G., F. Gatuingt, A. Ibrahimbegovic, ‘On numerical implementation of a coupled rate-dependent damage-plasticity constitutive model for concrete in application to high rate dynamics’, International Journal of Engineering Computations, 22, 583-604 (2005)
  154. Dominguez N., D. Brancherie, L. Davenne, A. Ibrahimbegovic, ‘Prediction of crack pattern distribution in Reinforced Concrete by coupling a strong discontinuity model of concrete cracking and a bond-slip of reinforcement model‘, International Journal of Engineering Computations, 22, 558-582 (2005)
  155. Markovic D., R. Niekamp, A. Ibrahimbegovic, H. G. Matthies, R.L. Taylor, ‘Multi-scale modeling of heterogeneous structures with inelastic constitutive behavior. Part I : Mathematical and physical aspects‘, International Journal of Engineering Computations, 22, 664-683 (2005)
  156. Brank B., S. Mamouri, A. Ibrahimbegovic, ‘Constrained finite rotations in dynamics of shells and Newmark implicit time-stepping schemes‘, International Journal of Engineering Computations, 22, 505-535 (2005)
  157. Ibrahimbegovic A., I. Gresovnik, D. Markovic, S. Melnyk, T. Rodic, ‘Shape optimization of two-phase material with microstructure‘, International Journal of Engineering Computations, 22, 605-645 (2005)
  158. Colliat J.B., A. Ibrahimbegovic, L. Davenne, ‘Saint-Venant multi-surface plasticity model in strain space and in stress resultants’, International Journal of Engineering Computations, 22, 536-557 (2005)
  159. Ibrahimbegovic A., J.B. Colliat, L. Davenne ‘Thermomechanical coupling in folded plates and non-smooth shells’, Computer Methods in Applied Mechanics and Engineering, 194, 2686-2707, (2005)
  160. Courtois P., A. Ibrahimbegovic, ‘Vecteur de rotation incrémental pour les coques non linéaires en grandes rotations’, Revue européenne des éléments finis, 13, 857-880, (2004)
  161. Brancherie D.,A. Ibrahimbegovic, ‘Modélisation « macro » de phénomènes dissipatifs localisés à l’échelle « micro » : formulation et implantation numérique’, Revue européenne des éléments finis, 13, 461-475 (2004)
  162. Ibrahimbegovic A., C. Knopf-Lenoir, A. Kucerova, P. Villon, ‘Optimal design and optimal control of elastic structures undergoing finite rotations and deformations’, International Journal for Numerical Methods in Engineering, 61, 2428-2460, (2004)
  163. Markovic D., Ibrahimbegovic A. ‘On micro-macro interface conditions for micro-scale based FEM for in elastic behavior of heterogeneous materials’, Computer Methods in Applied Mechanics and Engineering, 193, 5503-5523, (2004)
  164. Ibrahimbegovic A., D. Markovic, F. Gatuingt, ‘Constitutive Model of Coupled Damage-Plasticity and Its Finite Element Implementation’, Revue européenne des éléments finis, 12, 381-405, (2003)
  165. Ibrahimbegovic A., Markovic D., ‘Strong coupling methods in multi-phase and multi-scale modeling of inelastic behavior of heterogeneous structures’, Computer Methods in Applied Mechanics and Engineering, 192, 3089-3107, (2003)
  166. Ibrahimbegovic A. ‘On the geometrically exact Formulation of Structural Mechanics and Its Applications to Dynamics, Control and Optimization’, Comptes Rendus de l’Academie des Sciences, Part II: Mécanique, 331, 383-394, (2003)
  167. Ibrahimbegovic A., D. Brancherie, ‘Combined hardening and softening constitutive model for plasticity: precursor to shear slip line failure’, Computational Mechanics, 31, 88-100 (2003)
  168. Ibrahimbegovic A., A. Delaplace, ‘Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle materials’, Computers and Structures, 81, 1255-1265, (2003)
  169. Ibrahimbegovic A., R.L. Taylor, H. Lim, ‘Nonlinear Dynamics of Flexible Multibody Systems’, Computers and Structures, 81, 1113-1132, (2003)
  170. Davenne L., F. Ragueneau, J. Mazars, A. Ibrahimbegovic, ‘Efficient Approach to Earthquake Engineering Analysis’, Computers and Structures, 81, 1223-1239, (2003)
  171. Brank B., J.Korelc, A. Ibrahimbegovic, ‘Dynamics and Time-Stepping Schemes for Elastic Shells Undergoing Finite Rotations’, Computers and Structures, 81, 1193-1210 (2003)
  172. Ibrahimbegovic A., C. Knopf-Lenoir, ‘Shape Optimization of Elastic Structural Systems Undergoing Large Rotations: Simultaneous Solution Procedure’ Computer Modeling in Engineering Science, 4, 337-344 (2003)
  173. Ibrahimbegovic A., R.L. Taylor, ‘On the role of frame-invariance of structural mechanics models at finite rotations’, Computer Methods in Applied Mechanics and Engineering, 191, 5159-5176 (2002)
  174. Colliat J.B., L. Davenne, A. Ibrahimbegovic, ‘Modélisation jusqu’à rupture de murs en maçonnerie chargés dans leur plan’, Revue francaise de génie civil, 4, 593-606, (2002)
  175. Brank B., J.Korelc, A.Ibrahimbegovic, ‘Nonlinear shell problem formulation accounting for though-the-thickness stretching and its finite element implementation’, Computers and Structures, 80, 696-717, (2002)
  176. Ibrahimbegovic A., S. Mamouri, ‘Energy conserving/decaying implicit time-stepping scheme for nonlinear dynamics of three-dimensional beams undergoing finite rotations’, Computer Methods in Applied Mechanics and Engineering, 191, 4241-4258, (2002)
  177. Ibrahimbegovic A., L. Chorfi, ‘Covariant principal axis formulation of associated coupled thermoplasticity at finite strains and its numerical implementation’, International Journal of Solids and Structures, 39, 499-528, (2002)
  178. Ibrahimbegovic A., L. Chorfi, F. Gharzeddine, ‘Thermomechanical Coupling at Finite Elastic Strain: Covariant Formulation and Numerical Implementation’, Communications in Numerical Methods in Engineering, 17, 275-289 (2001)
  179. Ibrahimbegovic A., B. Brank, P. Courtois, ‘Vector-like Parameterization on Constrained Finite Rotations for Smooth Shells’, International Journal for Numerical Methods in Engineering, 52, 1235-1252 (2001)
  180. Mamouri S., A. Ibrahimbegovic, ‘Schéma dissipatif HHT d’intégration temporelle pour un modèle de poutre en grandes rotations’, Revue européenne des éléments finis, 10, 607-623, (2001)
  181. Chorfi L., A. Ibrahimbegovic, ‘Modèles de plasticité et viscoplasticité pour le chargement cyclique’, Revue européenne des éléments finis, 10, 77-97, (2001)
  182. Brank B., A. Ibrahimbegovic, ‘On the relation between different parameterizations of finite rotations for shells’, Engineering Computations, 18, 950-973, (2001)
  183. Gharzeddine F, A. Ibrahimbegovic, ‘Incompatible Mode Method for Finite Deformation Quasi-Incompressible Elasticity’, Computational Mechanics, 24, 419-425, (2000)
  184. Ibrahimbegovic A., S. Mamouri, R.L. Taylor, A. Chen, ‘Finite Element Method in Dynamics of Flexible Multibody Systems: Modeling of Holonomic Constraints and Energy-Conserving Integration Schemes’, Multibody System Dynamics, 4, 195-223, (2000)
  185. Ibrahimbegovic A., S. Mamouri, ‘On Rigid Components and Joint Constraints in Nonlinear Dynamics of Flexible Multibody Systems Employing 3d Geometrically Exact Beam Model’, Computer Methods in Applied Mechanics and Engineering, 188, 805-831, (2000)
  186. Ibrahimbegovic A., L. Chorfi, ‘Viscoplasticity Model in Finite Deformations With Combined Isotropic and Kinematic Hardening’, Journal for Computers and Structures, 77, 509-525, (2000)
  187. Ibrahimbegovic A., M. Al Mikdad, ‘Quadratically Convergent Direct Calculation of Critical Points for 3d Structures Undergoing Finite Rotations’, Computer Methods in Applied Mechanics and Engineering, 189, 107-120, (2000)
  188. Ibrahimbegovic A., F. Gharzeddine, ‘Finite Deformation Plasticity in Principal Axes: From a Manifold to the Euclidean Setting’, Computer Methods in Applied Mechanics and Engineering, 171, 341-369, (1999)
  189. Ibrahimbegovic A., S. Mamouri, ‘Nonlinear Dynamics of Flexible Beams in Planar Motion: Formulation and Time-Stepping Scheme for Stiff Problems’, Journal of Computer and Structures, 70, 1-21, (1999)
  190. Ibrahimbegovic A., F. Gharzeddine, L. Chorfi, ‘Classical Plasticity and Viscoplasticity Models Reformulated: Theoretical Basis and Numerical Implementation’, International Journal for Numerical Methods in Engineering, 42, 1499-1535, (1998)
  191. Ibrahimbegovic A., M. Al Mikdad, ‘Finite Rotations in Dynamics of Beams and Implicit Time-Stepping Schemes’, International Journal for Numerical Methods in Engineering, 41, 781-814, (1998)
  192. Ibrahimbegovic A., ‘Théorie géométriquement exacte des coques en rotations finies et son implantation éléments finis’, Revue européenne des éléments finis, 6, 263-335, (1997)
  193. Ibrahimbegovic A., ‘On the Choice of Finite Rotation Parameters’, Computer Methods in Applied Mechanics and Engineering, 149, 49-71 (1997)
  194. Al Mikdad M., A. Ibrahimbegovic, ‘Dynamique et schémas d’intégration pour modèles de poutres géométriquement exacts’, Revue européenne des éléments finis, 6, 471-502 (1997)
  195. Ibrahimbegovic A., ‘Stress Resultant Geometrically Exact Shell Theory for Finite Rotations and Its Finite Element Implementation’, ASME Applied Mechanics Reviews, 50, 199-226 (1997)
  196. Ibrahimbegovic A., ‘Finite Elastoplastic Deformations of Membrane Shells’, Engineering Computations, 13, 122-142 (1996)
  197. Ibrahimbegovic A., H. Shakourzadeh, J.L. Batoz, M. Al Mikdad, Y.Q. Guo, ‘On the Role of Geometrically Exact and Second Order Theories in Buckling and Post-Buckling Analysis of Three-Dimensional Beam Structures’, Journal of Computers and Structures, 61, 1101-1114, (1996)
  198. Ibrahimbegovic A., ‘Finite Elastic Deformations and Finite Rotations of 3D Continuum with Independent Rotation Field’, Revue européenne des éléments finis, 5/6, 555-576, (1995)
  199. Al Mikdad M., A. Ibrahimbegovic, ‘Interpolation non linéaire pour un élément fini de poutre en grandes rotations tridimensionnelles’, Revue européenne des éléments finis, 5/6, 693-719, (1995)
  200. Ibrahimbegovic A., F. Frey, I. Kozar, ‘Computational Aspects of Vector-like Parameterization of Three-Dimensional Finite Rotations, International Journal for Numerical Methods in Engineering, 38, 3653-3673, (1995)
  201. Ibrahimbegovic A., I. Kozar, ‘Nonlinear Wilson’s Brick Element for Finite Elastic Deformation of Three-Dimensional Solids’, Communications in Numerical Methods in Engineering, 11, 655-664, (1995)
  202. Ibrahimbegovic A., ‘On Assumed Shear Strain in Finite Rotation Shell Analysis’, Engineering Computations, 12, 425-438, (1995)
  203. Kozar I., Ibrahimbegovic A., ‘Finite Element Formulation of the Finite Rotation Solid Element’, Journal for Finite Element in Analysis and Design, 20, 101-126, (1995)
  204. Ibrahimbegovic A., ‘On FE Implementation of Geometrically Nonlinear Reissner’s Beam Theory: Three-Dimensional Curved Beam Elements’, Computer Methods in Applied Mechanics and Engineering, 122, 11-26, (1995)
  205. Ibrahimbegovic A., F. Frey, ‘Variational Principles and Membrane Elements With Drilling Rotations for Geometrically Nonlinear Elasticity’, International Journal for Numerical Methods in Engineering, 38, 1885-1900, (1995)
  206. Ibrahimbegovic A., ‘Finite Elastoplastic Deformations of Space-Curved Membranes’, Computer Methods in Applied Mechanics and Engineering, 119, 371-394, (1994)
  207. Ibrahimbegovic A., ‘On Implicit Integration of a General Form of Rate-\-Independent Plasticity’, International Journal for Engineering Modeling, 7, 21-27, (1994)
  208. Ibrahimbegovic A., ‘Stress Resultant Geometrically Nonlinear Shell Theory With Drilling Rotations. Part I: A Consistent Formulation’, Computer Methods in Applied Mechanics and Engineering, 118, 265-284, (1994)
  209. Ibrahimbegovic A., ‘Stress Resultant Geometrically Nonlinear Shell Theory With Drilling Rotations. Part II: Computational Aspects’, Computer Methods in Applied Mechanics and Engineering, in 118, 285-308, (1994)
  210. Ibrahimbegovic A., F. Frey, ‘Stress Resultant Geometrically Nonlinear Shell Theory With Drilling Rotations. Part III: Linearized Kinematics’, International Journal for Numerical Methods in Engineering, 37, 3659-3683, (1994)
  211. Ibrahimbegovic A., ‘Equivalent Spatial and Material Descriptions of Finite Deformation Elastoplasticity in Principal Axes’, International Journal of Solids and Structures, 31, 3027-3040, (1994)
  212. Ibrahimbegovic A., ‘Quadrilateral Finite Elements for Analysis of Thick and Thin Plates’, Computer Methods in Applied Mechanics and Engineering, 110, 195-209, (1993)
  213. Ibrahimbegovic A., F. Frey, ‘Geometrically Nonlinear Method of Incompatible Modes in Application to Finite Elasticity With Independent Rotation Field’, International Journal for Numerical Methods in Engineering, 36, 4185-4200, (1993)
  214. Ibrahimbegovic A., F. Frey and B. Rebora, ‘Une approche unifiée de la modélisation des structures complexes: les éléments finis avec degré de liberté de rotation’, Revue européenne des éléments finis, 2, 257-286, (1993)
  215. Ibrahimbegovic A., ‘Mixed Finite Element With Drilling Rotations for Plane Problems in Finite Elasticity’, Computer Methods in Applied Mechanics and Engineering, 107, 225-238, (1993)
  216. Ibrahimbegovic A., F. Frey, ‘Finite Element Analysis of Linear and Nonlinear Planar Deformation of Elastic Initially Curved Beams’, International Journal for Numerical Methods in Engineering, 36, 3239-3258, (1993)
  217. Ibrahimbegovic A., F. Gruttmann, ‘A Consistent Finite Element Formulation of Nonlinear Membrane Shell Theory With Particular Reference to Elastic Rubberlike Material’, Journal for Finite Element in Analysis and Design, 12, 75-86, (1993)
  218. Ibrahimbegovic A., F. Frey, ‘An Efficient Implementation of Stress Resultant Plasticity in Analysis of Reissner-Mindlin Plates’, International Journal for Numerical Methods in Engineering, 36, 301-322, (1993)
  219. Ibrahimbegovic A., F. Frey, ‘Stress Resultant Finite Element Analysis of Reinforced Concrete Plates’, Journal of Engineering Computations, 10, 15-30, (1993)
  220. Ibrahimbegovic A., ‘A Consistent Finite Element Formulation of Nonlinear Elastic Cables’, Communications in Applied Numerical Methods, 8, 547-556, (1992)
  221. Ibrahimbegovic A., F. Frey and J.L. Sarf, ‘Limit Load Analysis of Plates With Particular Reference to Steel and Reinforced Concrete Plates’, International Journal for Engineering Modeling, 5, 75-82, (1992)
  222. Ibrahimbegovic A., F. Frey, ‘Quadrilateral Finite Elements with Rotational Degrees of Freedom’, Engineering Fracture Mechanics, 43, 13-24, (1992)
  223. Ibrahimbegovic A., ‘Plate Quadrilateral Finite Element with Incompatible Modes’, Communications in Applied Numerical Methods, 8, 497-504, (1992)
  224. Ibrahimbegovic A. and E.L. Wilson, ‘Efficient Computational Procedures for Systems with Local Nonlinearities’, Engineering Computations, 9, 385-398, (1992)
  225. Ibrahimbegovic A., E.L. Wilson, ‘Thick Shell and Solid Finite Elements With Independent Rotation Fields’, International Journal for Numerical Methods in Engineering, 31, 1393-1414, (1991)
  226. Ibrahimbegovic A., E.L. Wilson, ‘A Unified Formulation for Triangular and Quadrilateral Thin Shell Finite Elements with Six Degrees of Freedom’, Communications in Applied Numerical Methods, 7, 1-9, (1991)
  227. Ibrahimbegovic A., E.L. Wilson, ‘A Modified Method of Incompatible Modes’, Communications in Applied Numerical Methods, 7, 187-194, (1991)
  228. Ibrahimbegovic A., E.L. Wilson, ‘Unified Computational Model for Static and Dynamic Frictional Contact Analysis’, International Journal for Numerical Methods in Engineering, 34, 233-247, (1991)
  229. Ibrahimbegovic A., B. Verbic, ‘Ritz Vectors for Dynamic Structure-Foundation Interaction Analysis’, International Journal for Engineering Modeling, 4, 21-26, (1991)
  230. Ibrahimbegovic A., H.C. Chen, E.L. Wilson, R.L. Taylor, ‘Ritz Method for Dynamic Analysis of Linear Systems with Non-Proportional Damping’, International Journal for Earthquake Engineering and Structural Dynamics, 19, 877-889, (1990)
  231. Ibrahimbegovic A., E.L. Wilson, ‘Automated Truncation of Ritz Vector Basis in Modal Transformation’, ASCE Journal of Engineering Mechanics Division, 116, 2506-2520, (1990)
  232. Ibrahimbegovic A., E.L. Wilson, ‘A Methodology for Dynamic Analysis of Linear Structure-Foundation Systems with Local Nonlinearities’, International Journal for Earthquake Engineering and Structural Dynamics, 19, 1197-1208, (1990)
  233. Ibrahimbegovic A., R.L. Taylor, E.L. Wilson, ‘A Robust Membrane Quadrilateral Element With Drilling Degrees of Freedom’, International Journal for Numerical Methods in Engineering, 30, 445-457, (1990)
  234. Ibrahimbegovic A., ‘A Novel Membrane Finite Element with an Enhanced Displacement Interpolation’, Journal for Finite Elements in Analysis and Design, 7, 167-179, (1990)
  235. Wilson E.L., A. Ibrahimbegovic, ‘Addition of Incompatible Displacement Modes for the Calculation of Element Stiffness and Stress’, Journal for Finite Elements in Analysis and Design, 7, 229-242, (1990)
  236. Ibrahimbegovic A., E.L. Wilson, ‘Simple Numerical Algorithms for Mode Superposition Analysis of Discrete Systems with Non-Proportional Damping’, Journal of Computers and Structures, 33, 523-531, (1989)

Special Issues/ Proceedings: 

  1. P. Trovalusci, T. Sadowski, A. Ibrahimbegovic, ‘Multiphysics and Multiscale Modelling for Advanced and Sustainable Materials’, Sapienza University, Rome, Italy, (2024)
  2. A. Ibrahimbegovic, A. Kucerova, ‘Synergy between Multiphysics/Multiscale Modelling and Machine Learning’, Proceedings S4ML Conference, CT Prague, Czech Republic, (2024)
  3. A. Ibrahimbegovic, ‘Special Issue on multiscale computations for solids and fluids’, Coupled Systems Mechanics, vol. 12, no. 5 (2023)
  4. A. Ibrahimbegovic, S. Dolarevic, M. Cohodar-Husic, ‘ECCOMAS MSF 2023 – Multiscale Computational Methods for Solids and Fluids’, University of Sarajevo, Sarajevo, Bosnia-Herzegovine,  (2023)
  5. A. Ibrahimbegovic, ‘Special Issue ECCOMAS MSF 2021’, Coupled Systems Mechanics, vol. 11, no. 1-3 (2022)
  6. A. Ibrahimbegovic, ‘Special Issue ACSM20’, Coupled Systems Mechanics, vol. 10, no. 3 (2021)
  7. A. Ibrahimbegovic, M. Nikolic, ‘ECCOMAS MSF 2021 – Multiscale Computational Methods for Solids and Fluids’, University of Split, FGAG, Split, Croatia,  (2021)
  8. A. Ibrahimbegovic, ‘ECCOMAS MSF 2019 – Special Issue’, Coupled Systems Mechanics, vol. 9, no. 1/2 (2020)
  9. A. Ibrahimbegovic, S. Dolarevic, E. Dzaferovic, ‘ECCOMAS MSF 2019 – Multiscale Computational Methods for Solids and Fluids’, University of Sarajevo, GF & MF, Sarajevo, BH,  (2019)
  10. A. Ibrahimbegovic, P.M. Pimenta, ‘CILAMCE 2018 – Special Issue’, Coupled Systems Mechanics, vol. 8, no. 1/2 (2019)
  11. A. Ibrahimbegovic, P.M. Pimenta, ‘CILAMCE 2018 – Special Issue’, Latin American Journal of Solids and Structures, in press (2019)
  12. A. Ibrahimbegovic, P.M. Pimenta, ‘CILAMCE 2018 – XXXIX IberoLatin American Congress on Computational Methods in Engineering’, BNF – Paris / UT – Compiegne, (2018)
  13. A. Ibrahimbegovic, ‘Multiscale Computations for Solids and Fluids’, Coupled Systems Mechanics, vol. 7, no. 1/2 (2018)
  14. A. Ibrahimbegovic, B. Brank, I. Kozar, ‘ECCOMAS MSF 2017 – Multiscale Computational Methods for Solids and Fluids’, University of Ljubljana, FGG, Ljubljana,  (2017)
  15. A. Ibrahimbegovic, J-M. Ghidaglia, A. Serdarevic, E. Ilic, M. Hrasnica, S. Dolarevic, N. Ademovic, ‘ECCOMAS MSF 2015 – Multiscale Computational Methods for Solids and Fluids’, Gradjevinski fakultet, Sarajevo,  (2015)
  16. Dinkler D., A. Ibrahimbegovic, ‘Multiphysics Problems’, Coupled Systems Mechanics, vol. 3, no. 1, (2014)
  17. Ibrahimbegovic A., H. Mang, ‘Engineering Strucures: Modeling and Computations – IASS-IACM 2012 special issue’, Engineering Structures, vol. 50, no. 1, (2013)
  18. Ibrahimbegovic A., K.J. Bathe, ‘IASS-IACM 2012 special issue’, Computers and Structures, vol. 127, no. 1, (2013)
  19. Ibrahimbegovic A., S. Dolarevic, M. Hrasnica, M. Madzarevic, M. Zlatar, ‘IASS-IACM 2012: 7th International Conference on Computational Mechanics for Spatial Structures’, Gradjevinski fakultet, Sarajevo,  (2012)
  20. Ibrahimbegovic A., ‘Concrete and reinforced-concrete structures: computational methods for dealing with novel issues regarding durability, identification and optimal design’, Computers and Concrete, vol 7, no. 4, (2010)
  21. Ibrahimbegovic A., M. Papadrakakis, ‘Multiscale and mathematical aspects in solid and fluid mechanics’, Computer Methods in Applied Mechanics and Engineering, vol. 199, no. 21-22, (2010)
  22. Ibrahimbegovic A., I. Kozar, P. Marovic, ‘Complex engineering structures under extreme conditions: modeling, computations, identification and uncertainty’, Engineering Computations, vol. 26, no. 1-2, (2009)
  23. Ibrahimbegovic A., M. Zlatar, ‘Damage assessment and reconstruction after natural disasters and previous military activities’, Gradjevinski fakultet, Sarajevo,  (2008)
  24. Ibrahimbegovic A., F. Dias, H. Matthies, P. Wriggers, Proceedings ECCOMAS Thematic Conference on ‘Multiscale Computational Methods for Solids and Fluids’, Cachan,   (2007)
  25. Ibrahimbegovic A., I. Kozar, ‘Extreme man-made and natural hazards in dynamics of structures’, Sveucilisna knjiznica, Rijeka, Croatia, (2006)
  26. Ibrahimbegovic A., B. Brank, ‘Engineering structures: nonlinear analysis, optimal design and identification’, Engineering Computations, vol. 22, no. 5-6, (2005)
  27. Ibrahimbegovic A., B. Brank, Proceedings NATO-ARW ‘Multi-physics and Multi-scale Computer Models in Nonlinear Analysis and Optimal Design of Engineering Structures under Extreme Conditions’, University if Ljubljana, Slovenia, (2004)
  28. Ibrahimbegovic A., ‘Advanced computational models and techniques in dynamics’, Computers and Structures, vol. 81, no. 12, (2003)
  29. Ibrahimbegovic A. W. Schiehlen, ‘Recent advancements in multibody dynamics’, Multibody System Dynamics, vol. 8, no. 3, (2002)
  30. Ibrahimbegovic A., W. Kraetzig, ‘Shells: theoretical formulation, mathematical analysis and finite element implementation’, Computers and Structures, vol 80, no. 9-10 (2002)
  31. Ibrahimbegovic A., W. Schiehlen, Proceedings EUROMECH-427 ‘Computational Techniques and Applications in Nonlinear Dynamics of Structures and Multibody Systems’, Cachan,  (2001)
  32. Géradin M., A. Ibrahimbegovic, A. Cardona, ‘Flexible Multibody Dynamics’, Multibody System Dynamics, Vol. 4, Nos. 2-3, (2000)
  33. Ibrahimbegovic A., M. Géradin,  ‘Rotations finies en mécanique des solides et des structures’, Revue européenne des éléments finis, Vol. 4, Nos. 5-6, (1995)

Chapters in Books: 

  1. Hajdo E., Hadzalić E., Ibrahimbegovic A., Karavelic E., Ademovic N., Effective Buckling Length Analysis in Steel Frame Columns: A Comprehensive Review and Novel Approaches. In: Ademović, N., M., Kevrić, J., Akšamija, Z. (eds) Advanced Technologies, Systems, and Applications VIII. IAT 2023. Lecture Notes in Networks and Systems, vol 549. Springer (2023),
  2. Hajdo E., Hadzalić E., Ibrahimbegovic A., Linear Buckling Analysis of Structures on Elastic Supports. In: Ademović, N., Mujčić, E., Mulić, M., Kevrić, J., Akšamija, Z. (eds) Advanced Technologies, Systems, and Applications VII. IAT 2022. Lecture Notes in Networks and Systems, vol 539. Springer (2023), DOI: DOI: 10.1007/978-3-031-17697-5_8
  3. Ademović, N., Ibrahimbegovic, A., Integrity and Resilience of Structures and Infrastructures Under Extreme Transient Loads. In: Ademović, N., Mujčić, E., Mulić, M., Kevrić, J., Akšamija, Z. (eds) Advanced Technologies, Systems, and Applications VII. IAT 2022. Lecture Notes in Networks and Systems, vol 539. Springer (2023), DOI: 10.1007/978-3-031-17697-5_7
  4. Ibrahimbegovic A., ‘Flexible Blades Wind-Turbines: Giant Installations and System-of Systems Approach to Optimizing Wind-Energy Farms’, in CIGOS2021 Proceedings Book, (eds. Cuong H.M et al.), Springer, (2022) DOI: 10.1007/978-981-16-7160-9_1
  5. Karavelic E., M. Nikolic, A. Ibrahimbegovic, ‘Multiscale Model of Concrete Failure’, in (ed. D. Brancherie, S. Bouvier, P. Feissel, A. Ibrahimbegovic), ISTE Wiley, 99-122, (2017)
  6. Sarfaraz S.M.,  B.V. Rosic, H.G. Matthies, A. Ibrahimbegovic, ‘Stochastic Upscaling via Linear Bayesian Updating’, in ‘Multiscale Modeling of Heterogeneous Structures’ (ed. J. Soric, P. Wriggers, O. Allix), Springer, 163-181, (2017)
  7. Ibrahimbegovic, ‘Computations, testing, uncertainty propagation and  size effect in localized failure of massive composite structures’, keynote lecture, in ‘Insight and Innovation in Structural Engineering, Mechanics and Computations’, (ed. A. Zingoni), CRC Press, (2016)
  8. Marenic E., A. Ibrahimbegovic, ‘Multiscale atomistic-to-continuum reduced models for micromechanical systems’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, 215-244, (2016)
  9. Brank B., A. Stanic, A. Ibrahimbegovic, ‘A path-following method based on plastic dissipation control’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, 29-48, (2016)
  10. Niekamp R., M. Kroche, A. Ibrahimbegovic, ‘Heterogeneous Materials Models, Coupled Mechanics-Probability Problems and Energetically Optimal Model Reduction’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, 287-314, (2016)
  11. Nikolic M., A. Ibrahimbegovic, P. Miscevic, ‘Modelling of fluid-structure interaction for internal fluid flow in cracks by using embedded strong discontinuities’, in (ed. A. Ibrahimbegovic), ‘Computational Methods for Solids and Fluids: Multiscale Analysis, Probability Aspects and Model Reduction’, Springer, 315-342, (2015)
  12. Brank B., A. Ibrahimbegovic, U. Bohinc, ‘On Discrete-Kirchhoff Plate Finite Elements: Implementation and discretization error’, in (eds. H. Altenbach, G.I. Mikhasev) ‘Shell and Membrane Theories in Mechanics and Biology’, Springer, 109-131, (2015)
  13. Matthies H., A. Ibrahimbegovic, ‘Stochastic Multiscale Coupling of Inelastic Processes in Solid Mechanics’, in (eds. M. Papadrakakis, G. Stefanou) ‘Multiscale Modeling and Uncertainty Quantification of Materials and Structures’, Springer, 135-157, (2014)
  14. Ibrahimbegovic A., L. Davenne, D. Markovic, N. Dominguez, ‘Performance Based Earthquake-Resistant Design:   Migrating Towards Nonlinear Models and Probabilistic Framework’, in (ed. M. Fischinger) ‘Performance Based Seismic Engineering – Vision for Earthquake Resilient Society’, Springer, 243-252, (2014)
  15. Jehel P., P. Leger, A. Ibrahimbegovic, ‘Structural seismic fragility analysis of RC frame with a new family of Rayleigh damping models‘, in (eds. M. Papadrakakis, G. Stefanou, V. Papadopoulos), ‘Computational Methods in Stochastic Dynamics – Vol. 2’, Springer, 267-292, (2012)
  16. Ibrahimbegovic A., J.B. Colliat, M. Hautefeuille, D. Brancherie, S. Melnyk, ‘Probability based size effect representation for failure of civil engineering structures built of heterogeneous materials’, in (eds. M. Papadrakakis, M. Fragiadakis, G. Stefanou), ‘Computational Methods in Stochastic Dynamics’, Springer, Berlin, 289-311, (2011)
  17. Ibrahimbegovic A., A. Kucerova, D. Brancherie, M. Hautefeuille, J.B. Colliat, N. Friedman, and M. Zlatar, ‘Civil engineering structures: multiscale damage representation, identification, controlled destruction and quick reconstruction’, in (eds. Ibrahimbegovic A., M. Zlatar) ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, 1-28 (2009)
  18. Dolarevic S., Ibrahimbegovic A., ‘Nonlinear behavior of soils as the main source of damage in structures’, in (eds. Ibrahimbegovic A., M. Zlatar) ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, 299-320 (2009)
  19. Ibrahimbegovic A., A. Boulkertous, L. Davenne, M. Muhasilovic, J. Duhovnik, A. Pokrklic, ‘Fire induced damage in structures and infrastructure: analysis, testing and modeling’,  in (eds. Ibrahimbegovic A., M. Zlatar) ‘Damage assessment and reconstruction after war or natural disaster’, Springer, Berlin, 321-342 (2009)
  20. Colliat J.B., M. Hautefeuille, A. Ibrahimbegovic, ‘Size effect interpretation by inelastic macro-scale model with correlated probabilistic properties defined from micro-structure’, in (ed. O. Cazacu, F. Darve) ‘Multiscale Modeling of Heterogeneous Materials : From Microstructure to Macro-Scale Properties’, iSTE, John Wiley,  (2008)
  21. Ibrahimbegovic A., D. Brancherie, J.B. Colliat, L. Davenne, N. Dominguez, G. Hervé, P. Villon, ‘Nonlinear transient analysis and design of complex structures for worst case accidents: experience from industrial and military applications’, in (eds. A. Ibrahimbegovic and I. Kozar) in ‘Extreme man-made and natural hazards in dynamics of structures’, Springer, Berlin, 37-70, (2007)
  22. Ibrahimbegovic A., ‘The role of structural mechanics in multi-scale modeling of the inelastic behavior of engineering materials’, in , (ed. B.H.V. Topping, G. Montero and R. Montenegro) ‘Inovation in Computational Structures Technology’, Saxe-Coburg Publications,  (2006)
  23. Brancherie D., A. Ibrahimbegovic, ‘ Méthode à discontinuités fortes‘, in ‘La méthode des éléments finis’, in (ed. P. Breitkopf) series MIME, Hermes-Lavoisir, Paris (2006)
  24. Ibrahimbegovic A., ‘Nonlinear shell theory with finite rotations and finite strains: recent achievements’, in ‘Shell Structures: Theory and Applications’, in (eds. W. Pietraszkiewicz and C. Szymczak), Taylor & Francis/Balkema, London, 19-33, (2005)
  25. Ibrahimbegovic A., On the role of structural mechanics in inelastic material analysis and design, in ‘Multi-physics and Multi-scale Computer Models in Nonlinear Analysis and Optimal Design of Engineering Structures Under Extreme Conditions’, (eds. A. Ibrahimbegovic, B. Brank), IOS Press, 110-138, (2005)
  26. Clough R.W., E.L. Wilson, A. Ibrahimbegovic, ‘Early finite element research at University of California Berkeley and later years’, in ‘Multi-physics and Multi-scale Computer Models in Nonlinear Analysis and Optimal Design of Engineering Structures Under Extreme Conditions’, (eds. A. Ibrahimbegovic, B. Brank), IOS Press, 1-21, (2004)
  27. Dominguez N., F. Raguneau, A. Ibrahimbegovic, S. Michel-Ponelle, S. Ghavamian, ‘Bond-slip in reinforced-concrete structures, constitutive modeling and finite element implementation’, Computational Modelling of Concrete Structures, (eds. N. Bicanic, R. deBorst, H. Mang, G. Meschke), Balkema, Amsterdam, 205-215, (2003)
  28. Delaplace A., A. Ibrahimbegovic, ‘Discrete Modeling of Cracking of Brittle Materials in Large Relative Motion and Localization Problem’, IUTAM Symposium on ‘Computational Mechanics of Solid Materials at Large Strains’, (ed. C. Miehe), Kluwer Academic Press, 375-384, (2003)
  29. Ibrahimbegovic A, B. Brank, J. Korelc., ‘Nonlinear Shell Problem Formulation Accounting for Though-the-Thickness Stretching and Its Finite Element Implementation’,  CST-2002 Computational Structures Technology, (eds. B.H. Topping, Z. Bittnar), Comp Press, 33-62, (2002)
  30. Ibrahimbegovic A., S. Mamouri, ‘Dynamics of Complex Flexible Multibody Systems Undergoing Large Overall Motion’, in ‘Computational Aspects of Nonlinear Structural Systems with Large Rigid Body Motion’, (eds. JAC Ambrosio, M. Kleiber), IOS Press, 85-102, (2001)
  31. Ibrahimbegovic A., ‘An Intrinsic Form of the Stress Resultant Geometrically Exact Shell Theory’, in ‘Plates and Shells’, (eds. M. Fortin et al.), CRM Proceedings and Lecture Notes, Vol. 21, AMS, 209-223 (1999)
  32. Ibrahimbegovic A., ‘Finite Elastic Deformations of Three-Dimensional Continuum with Independent Rotation Field’, in ‘Recent advances in the finite element analysis: A book dedicated to Prof. R.L. Taylor’, (eds. T.J.R. Hughes, E. Onate, O.C. Zienkiewicz), CIMNE, Barcelona, 151-161 (1994)
  33. Ibrahimbegovic A., F. Frey, G. Fonder, Ch. Massonnet, ‘A Variational Formulation of Shallow Shells’, in ‘Finite elements in the 1990: A book dedicated to Prof. O.C. Zienkiewicz’, (eds. E. Onate, J. Periaux, A. Samuelsson), Springer-Verlag, Berlin, 68-81 (1991)

Conference Papers

  1. A. Ibrahimbegovic, S. Suljevic, ‘Hybrid stress and heat-flux formulation of thermodynamics for long-term simulations in thermo-viscoplasticity’, WCCM-2024/PANACM-2024 Congress, July 22-26, 2024, Vancouver, Canada
  2. M. Pires Kassab, E. de Morais Barreto Campello*, A. Ibrahimbegovic, ‘A kinematically-exact reduced-order rod model for elastoplastic failure in thin-walled members’, WCCM-2024/PANACM-2024 Congress, July 22-26, 2024, Vancouver, Canada
  3. M. Pires Kassab, E. de Morais Barreto Campello*, A. Ibrahimbegovic, ‘Theoretical developments on a kinematically-exact rod model for thin-walled members with cross-sectional deformation and finite strains’, WCCM-2024/PANACM-2024 Congress, July 22-26, 2024, Vancouver, Canada
  4. A. Ibrahimbegovic, R-A. Mejia-Nava, S. Ljukovac, G. Grozdanc, H. Rana, G. Canario-Gomes, ‘Coupled systems mechanics: synergy of natural and artificial intelligence for constructing predictive reduced models’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  5. E. Hadzalic, E. Hajdo, A. Ibrahimebgovic, ‘Seismic assessment of multi=story steel frame structure on pile foundation’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  6. E. Hajdo, E. Hadzalic, A. Ibrahimebgovic, ‘Buckling analysis of piles in weak single-layered soils’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  7. E. Karavelic, I. Imamovic, A. Ibrahimebgovic, ‘Maturity strength model for prediction of concrete compressive strength’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  8. I. Imamovic, A. Ibrahimbegovic, E. Mesic, E. Karavelic, ‘Beam models capable of representing failure of steel frame structures accounting for connection behavior, material nonlinearity and instability issues’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  9. R-A. Mejia-Nava, A. Ibrahimbegovic, ‘Developing a damping model for vibtation amplitude reduction’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  10. S. Suljevic, A. Ibrahimbegovic, S. Dolarevic, ‘Hybrid thermomechanical formulation with enhanced performance in thermo-elasticity and thermo-plasticity’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  11. S. Ljukovac, A. Ibrahimbegovic, M. Cohodar-Husic, ‘Optimal control of multibody system with geometrically exact Reissner’s beams’, S4ML 1st CEACM Int. Conference, June 19-21, 2024, Prague, Czech Republic
  12. A. Ibrahimbegovic, ‘Reduced model for fracture of geometrically exact beam (Keynote Lecture’, ECCOMAS Congress 2024, June 2-7, 2024, Lisbonne, Portugal
  13. S. Suljevic, A. Ibrahimbegovic, S. Dolarevic, ‘Regularized four-field variational formulation for thermo-elastodynamics and thermo-plasticity’, ECCOMAS Congress 2024, June 2-7, 2024, Lisbonne, Portugal
  14. V. Tojaga, T.C. Gasser, A. Kulachenko, S. Ostlund, A. Ibrahimbegovic, ‘On finite element implementation of geometrically nonlinear Reissner’s beam theory with embedded strong discontinuities’ ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  15. S. Ljukovac, A. Ibrahimbegovic, I. Imamovic, R-A. Nava-Meija, ‘Passive control of wind turbine blades by plastic dissipating hinges’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  16. S. Grbcic-Erdelj, G. Jelenic, A. Ibrahimbegovic, ‘Pure bending problem in non-linear micropolar elasticity, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  17. S. Suljevic, E. Hadžalic, A. Ibrahimbegovic, S. Dolarevic, ‘Hybrid stress-heat flux formulation of fully coupled thermodynamics’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  18. R-A. Mejia-Nava1, B-I. Garcia-Maya2, A. Ibrahimbegovic, N. Limnios, ‘Stochastic instability analysis of a geometrically exact 3D beam subjected to non-conservative loads’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  19. I. Imamovic, S. Ljukovac, A. Ibrahimbegovic, E. Mešić, ‘Beam models for small wind turbine support structure design’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  20. G. Grozdanić, A. Ibrahimbegović, M. Galić, ‘Different approaches in analysis and modelling laminated glass elements exposed to static load’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  21. E. Karaveli, A. Ibrahimbegovic, ‘Stochastic identification of concrete fracture parameters’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  22. E. Hajdo, E. Hadzalic, A. Ibrahimbegovic, ‘Stability analysis of complex structures on the elastic supports’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  23. A. Ibrahimbegovic, R-A. Mejia-Nava, S. Suljevic, S. Ljukovac and G. Grozdanic, ‘Computational structural mechanics: natural intelligence vs. artificial intelligence’, ECCOMAS MSF 2023, 6th Int. Conference on Computational Solids and Fluids, June 25-27, 2023, Sarajevo, Bosnia-Herzegovina
  24. A. Ibrahimbegovic, S. Dobrilla, H.G. Matthies, ‘Stochastic identification of fracture and bond properties for reinforced concrete from measurements’, UNCECOMP 2023, 5th Int. Conference on Uncertainty Quantification in computational Science and Engineering, June 12-14, 2023, Athens, Greece
  25. A. Ibrahimbegovic, H.G. Matthies, S. Dobrilla, E. Karavelic, R.A. Mejia-Nava, C.U. Nguyen, E. Hajdo, E. Hadzalic, I. Imamovic, ‘Stochastic Upscaling Representation of Size and Scale Effects’, 10th Int. Congress of Croatian Society of Mechanics (10th ICCSM), September 28-30, 2022, Pula, Croatia
  26. A. Ibrahimbegovic, ‘Fracture, Stochastic Upscaling and Size and Scale Effects’, The 2022 Int. Conf. Advances in Coupled Systems Mechanics (ACSM22), August 16-19, 2022, Seoul, Korea
  27. A. Ibrahimbegovic, Structural Mechanics Models: Natural Intelligence vs. Artificial Intelligence Choice’, Proceedings GRK2075, Braunschweig, Germany, July 11-12, 2022
  28. A. Ibrahimbegovic, ‘Flexible Blades Wind-Turbines: Giant Installations and System-of Systems Approach to Optimizing Wind-Energy Farms’, Int. Conference CIGOS2021, October 25-27, 2021, Ha Long, Vietnam
  29. A. Ibrahimbegovic, ‘Scale coarsening stochastic model reduction for failure mechanics’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  30. S. Dobrilla, A. Ibrahimbegovic, H.G. Matthies, ‘Bayesian inference of mechanical properties in a reinforced concrete model at different refinement levels’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  31. S. Suljevic, A. Ibrahimbegovic, S. Dolarevic, ‘Determinstic approach of parameter identification for concrete modeling’ ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  32. N. Ademovic, A. Ibrahimbegovic, ‘The resilience and durability of existing masonry structures’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  33. I. Imamovic, E. Mesic, A. Ibrahimbegovic, ‘Effect of nonlinear behavior of structural connections to global response of steel frame structure in dynamics’ ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  34. E. Karavelic, E. Hadzalic, A. Ibrahimbegovic, ‘Identification by Bayesian inference of stochastic plasticity macro-scale model’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  35. E. Hadzalic, E. Karavelic, A. Ibrahimbegovic, S. Dolarevic, ‘Stochastic identification of dam overload by Bayesian inference in a numerical model of acoustic dam-reservoir interaction’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  36. C.U. Nguyen, H.G. Matthies, A. Ibrahimbegovic, ‘Hybrid-stress formulation and conserving/decaying schemes for viscoplastic problem in dynamics’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  37. R.A. Mejia-Nava, A. Ibrahimbegovic, R. Lozano-Leal, ‘Control of instability problem under non-conservative load’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  38. M. Nikolić, A. Ibrahimbegovic, ‘Fracture propagation mechsnisms with embedded strong discontinuities and discrete lattice element approach’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  39. E. Hajdo, R.A. Mejia-Nava, I. Imamovic, A. Ibrahimbegovic, ‘Instability of frame structures under non-conservative loads’, ECCOMAS MSF 2021 – Multi-scale Comp. Methods for Solids and Fluids, 30 June –2 July 2021, Split, Croatia
  40. A. Ibrahimbegovic, ‘Integrity and Resilience of Structures and Infrastructure under Extreme Transient Loads’, ACEM-Structures 2020 Congress, 25-29 August 2020, Seol, South Korea
  41. R.A. Mejia Nava, A. Ibrahimbegovic, R. Lozano Leal, ‘Energy dissipation by controlling with high structural modes’, ACEM-Structures 2020 Congress, 25-29 August 2020, Seol, South Korea
  42. E. Karavelić, A. Ibrahimbegovic, ‘Reduced model of macro-scale stochastic plasticity identification by Bayesian inference’, ACEM-Structures 2020 Congress, 25-29 August 2020, Seol, South Korea
  43. C.U. Nguyen, A. Ibrahimbegovic, ‘Isotropic Damage Model of Kachanov: Theoretical Formulation and Numerical Simulation’, ACEM-Structures 2020 Congress, 25-29 August 2020, Seol, South Korea
  44. E. Hadzalic, A. Ibrahimbegovic, S. Dolarevic, ‘Numerical model of acoustic fluid-structure interaction in application to numerical analysis of dam structure with thermal effects included’, ACEM-Structures 2020 Congress, 25-29 August 2020, Seol, South Korea
  45. A. Ibrahimbegovic, ‘Stoschastic scale coarsening for inelastic heterogeneous materials’, 14th World Congress in Computational Mechanics (WCCM) – ECCOMAS Congress 2020, 19 – 24 July 2020, Paris, France
  46. R.A. Mejia Nava, E. Hajdo, I. Imamovic, A. Ibrahimbegovic, ‘Instability of thin structures under conservative and non-conservative loads’, 14th World Congress in Computational Mechanics (WCCM) – ECCOMAS Congress 2020, 19 – 24 July 2020, Paris, France
  47. C.U. Nguyen, A. Ibrahimbegovic, ‘Time-integration scheme and hybrid-stress formulation for visco-plastic problem in dynamics’, 14th World Congress in Computational Mechanics (WCCM) – ECCOMAS Congress 2020, 19 – 24 July 2020, Paris, France
  48. S. Suljevic, E. Karavelić, E. Hadzalic, A. Ibrahimbegovic, ‘3D Multi-scale analysis of inelastic processes in concrete-like materials until complete localized failure’, 14th World Congress in Computational Mechanics (WCCM) – ECCOMAS Congress 2020, 19 – 24 July 2020, Paris, France
  49. A. Ibrahimbegovic, ‘Resilience of structures and infrastructure under extreme transient loads’, ICCEA 2020 3rd International Conference on Civil Engineering and Architecture, 28-30 June 2020, Compiegne, France
  50. T. Saksala, P. Moreno-Navarro, A. Ibrahimbegovic, P.-A. Kane, ‘Cracking of granite rock through actuation of piezoelectric properties of quartz by high voltage’, EUROCK2020, 15-19 June 2020, Trondheim, Norway
  51. A. Ibrahimbegovic, H.G. Matthies, E. Karavelic, ‘Scale coarsening model reduction for failure mechanics of concrete composites: meso-scale to stochastic macro-scale transition’, MORTech 2019 – 5th Int. Workshop Reduced Basis, POD and PGD Model Reduction Techniques, Paris, France, 20-22 November 2019
  52. A. Ibrahimbegovic, ‘Design and Resilience of Structures and Infrastructure Under Extreme Transient Loads’, CoRASS 2019 – 3rd Int. Conf. Recent Advances on Nonlin. Design, Resilience and Rehabilitation of Structures, Coimbra, Portugal, 16-19 October 2019
  53. A. Ibrahimbegovic, ‘Coupled mechanics-probability multiscale computational framework for massive composite structures safety’, CMCS 2019 – Computa(onal Modelling of Complex Materials Across the Scales, Glasgow, UK, 1-4 October 2019
  54. S. Dobrilla, H. Matthies, A. Ibrahimbegovic, ‘Bayesian identification of mechanical properties in reinforced concrete model with localized failure’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  55. R.A. Mejia-Nava, A. Ibrahimbegovic, R. Lozano, ‘Control of instability in statics and dynamics’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  56. N. Limnios, A. Ibrahimbegovic, ‘Stochastic approximation to heterogeneous dynamic systems’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  57. N. Ademovic, A. Ibrahimbegovic, ‘Resilience vs conventional design of bridges – a review’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  58. E. Hajdo, A. Ibrahimbegovic, S. Dolarevic, ‘Buckling analysis of steel plate girders using finite element shell model’,ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  59. M. Nikolic, A. Ibrahimbegovic, ‘Lattice element method and its applicationss’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  60. J. Carija, M. Nikolic, Z. Nikolic, A. Ibrahimbegovic, ‘Cyclic model for concrete in discrete lattice model, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  61. I. Imamovic, A. Ibrahimbegovic, ‘Geometrically exact Kirchhoff’s planar beam’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  62. I. Imamovic, A. Ibrahimbegovic, E. Mesic, ‘Beam model capable of representing structural steel connections’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  63. E. Karavelic, A. Ibrahimbegovic, A. Kurtovic, ‘An embedded strong discontinuity multi-surface model for cracking of concrete’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  64. E. Hadzalic, A. Ibrahimbegovic, S. Dolarevic, ‘Seamless model for fluid-structure interaction predicting overall safety of dam structure under reservoir interaction’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  65. C.U. Nguyen, A. Ibrahimbegovic, ‘Neural networks for damage detection for damage detection in wind turbine tower: feasibility study’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  66. A. Ibrahimbegovic, N. Ademovic, E. Hadzalic, E. Hajdo, I. Imamovic, E. Karavelic, R.A. Mejia-Nava, P. Moreno-Navarro, C.U. Nguyen, I. Rukavina, ‘Resilience of structures and infrastructure under extreme transient loads’, ECCOMAS MSF 2019 – Multi-scale Comp. Methods for Solids and Fluids, Sarajevo, Bosnia-Herzegovina, 18–20 September 2019
  67. A. Stanic, B. Brank, A. Ibrahimbegovic, ‘Enhanced embedded strong discontinuity quadrilateral for dynamic crack propagation’, Complas 2019 – XV Int. Conference on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, September 3-5, 2019
  68. H.G. Matthies, A. Ibrahimbegovic, ‘Computational Aspects of Upscaling of Material Models’, Complas 2019 – XV Int. Conference on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, September 3-5, 2019
  69. M. Nikolic, A. Ibrahimbegovic, ‘Modelling of shear bands in fluid saturated poroplastic solids with embedded strong discontinuities’, ECCOMAS Conf. CM4P – Comp. Methods in Multi-scale, Multi-uncertainty and Multi-physics Problems, 15 – 17 July 2019, Porto, Portugal
  70. S. Dobrilla, N. Friedman, A. Ibrahimbegovic, H.G. Matthies, ‘Bayesian Identification for Bond-Slip Characterisation in a Reinforced-Concrete Model With Localizaed Failure’, UNCECOMP 2019 3rd Int. Conference on Uncertainty Quantification in Computational Sciences and Engineering, Crete, Greece, June 24–26, 2019
  71. T. Moshagen, M. Nikolic, E. Karavelic, A. Ibrahimbegovic, H.G. Matthies, ‘Scale Switching Computations for Heterogeneous Inelastic Materials’, UNCECOMP 2019 3rd Int. Conference on Uncertainty Quantification in Computational Sciences and Engineering, Crete, Greece, June 24–26, 2019
  72. A. Stanic, N. Friedman, A. Ibrahimbegovic, H.G. Matthies, ‘Parameter Identification and Crack Propagation in Structural Element’, UNCECOMP 2019 3rd Int. Conference on Uncertainty Quantification in Computational Sciences and Engineering, Crete, Greece, June 24–26, 2019
  73. A. Ibrahimbegovic, ‘Coupled Mechanics-Probability Approach for Size Effect Interpretation’, UNCECOMP 2019 3rd Int. Conference on Uncertainty Quantification in Computational Sciences and Engineering, Crete, Greece, June 24–26, 2019
  74. S. Dobrilla, N. Friedman, H.G. Matthies, A. Ibrahimbegovic, ‘Uncertainty propagation in a reinforced concrete model with localised’, GAMM Proceedings, Vienna, Austrial, February 18-22, 2019
  75. T. Moshagen, S. Sarfaraz, M. Nikolić, A. Ibrahimbegovic, H.G. Matthies, ‘Heterogeneous Inelastic Materials’, GAMM Proceedings, Vienna, Austrial, February 18-22, 2019
  76. A. Stanic, N. Friedman, B. Brank, A. Ibrahimbegovic, H.G. Matthies, Hermann, ‘Stochastic analysis of crack propagation in a structural element’, GAMM Proceedings, Vienna, Austrial, February 18-22, 2019
  77. X.-N. Do, A. Ibrahimbegovic, ‘Crack propagation in dynamics by embedded discontinuity approach and energy balance in simulations’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  78. T. Rukavina, A. Ibrahimbegovic, I. Kozar, ‘Modeling complete fiber pull-out in fiber-reinforced composites’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  79. S. Dobrilla, N. Friedman, T. Rukavina, H. Matthies, A. Ibrahimbegovic, ‘Probabilistic analysis of failure of fiber reinforced concrete’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  80. S. Grbcic, A. Ibrahimbegovic, G. Jelenic, ‘Numerical analysis of 3D micropolar boundary value problems’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  81. A. Mejia-Nava, A. Ibrahimbegovic, R. Lozano-Leal, ‘Vibration control by implicit dissipative scheme in nonlinear dynamics 2d beam structures’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  82. P. Moreno-Navarro, A. Ibrahimbegovic, A. Ospina, ‘Electrostatic and magnetostatic dual formulations and finite elment implementation based on differential forms’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  83. N. Limnios, A. Ibrahimbegovic, ‘Stochastic approximation to heterogeneous systems’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  84. I. Rukavina, A. Ibrahimbegovic, ‘Multiscale computation procedure for localized failure: ED-FEM versus FE2 micro-macro representations’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  85. I. Imamovic, A. Ibrahimbegovic, E. Mesic, ‘Experimental testing and numerical research on structural connection behavior under cyclic loading’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  86. E. Karavelic, A. Ibrahimbegovic, ‘Multi-surface plasticity model with softenening for solids with marked difference of failure’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  87. E. Hadzalic, A. Ibrahimbegovic, S. Dolarevic, ‘Novel method for acoustic fluid-structure interaction in application to overall safety of structures in quasi-static setting’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  88. A. Boujelben, A. Ibrahimbegovic, ‘Efficient computational model for fluid-structure interaction in application to large overall motion of giant wind turbine flexible blades with long term response’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  89. A. Ibrahimbegovic, A. Boujelben, X.N. Do, E. Hadzalic, I. Imamovic, E. Karavelic, A. Mejia-Nava, P. Moreno-Navarro, M. Nikolic, I. Rukavina, T. Rukavina, ‘Engineering structures integrity and durability validation’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  90. Hermann Matthies, Adnan Ibrahimbegovic, ‘Aspects of multi-scale coupling of inelastic processes in solid mechanics’, CILAMCE 2019 – XXIX Congres on Numerical Methods in Engineering, Paris/Compiegne, France, November 11-14, 2018
  91. A. Ibrahimbegovic, ‘Coupled mechanics-probability multiscale approach to computations, testing and uncertainty propagation for massive composite structures safety’, ACEM18/Structures 18 The 2018 World Congress on Advances in Civil, Environmental, and Materials Research and The 2018 Structures Congress, Incheon, Korea, August 27-31, 2018
  92. M. Nikolic, A. Ibrahimbegovic, ‘Mechanical failure of overhead power line conductors’, 9th Int. Congress Croatian Society of Mechanics, Split, Croatia, September 18-22, 2018
  93. A. Ibrahimbegovic, P. Moreno-Navarro, I. Rukavina, A. Ospina, F. Ben
    Belgacem, J.-L. Perez-Aparicio, ‘Refined modelling of smart structures: coupled
    thermomechanical-electromagnetic formulation and FE computations’, 9th Int. Congress Croatian Society of Mechanics, Split, Croatia, September 18-22, 2018
  94. A. Ibrahimbegovic, X.N. Do, E. Karavelic, M. Nikolic, T. Rukavina, I. Rukavina, ‘Quantifying the Size Effect in Localized Failure of Composite Structures through Coupled Probability-Multiscale-Mechanics Computations’, WCCM 2018 : World Congress in Computational Mechanics, New York City, July 22-27, 2018
  95. A. Ibrahimbegovic, J. Rocca, N. Limnios, ‘Stochastic approach to heterogeneous dynamic systems’, ESMC – the 10th European Solid Mechanics Conference, Bologna, Italy, July 2-6, 2018
  96. A. Ibrahimbegovic, E. Hadzalic, E. Karavelic, M. Nikolic, ‘Failure mechanisms in heterogeneous poro-plasticity media in application to fsi problems’, ECCM6-ECFD7 : 6th European Conf. Comp. Mech. & 7th European Conf. Comp. Fluid Dyn. , Glasgow, UK, June 11-15, 2018
  97. M. Nikolic, X.N. Do, A. Ibrahimbegovic, Z. Nikolic, ‘Energy balance in simulations of dynamic localized failure propagation with strain softening’, ECCM6-ECFD7 : 6th European Conf. Comp. Mech. & 7th European Conf. Comp. Fluid Dyn. , Glasgow, UK, June 1115, 2018
  98. S. Grbcic, A. Ibrahimbegovic, G. Jelenic, ‘Numerical analysis of experimentally significant micropolar problems in 3D’, ECCM6-ECFD7 : 6th European Conf. Comp. Mech. & 7th European Conf. Comp. Fluid Dyn. , Glasgow, UK, June 1115, 2018
  99. S. Grbcic, A. Ibrahimbegovic, G. Jelenic, ‘Finite element analysis of a linear elastic micropolar continuum: application of quadrilateral elements in 2D problems, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  100. J.L. Perez-Aparicio, P. Moreno-Navaro, A. Ibrahimbegovic, ‘Influence of secondary, two-way terms in the behavior of elasto-thermo-electro-magnetic coupled materials’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  101. E. Karavelic, M. Nikolic, A. Ibrahimbegoic, ‘Lattice element model in ismulations of concret pilure. Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  102. A. Ibrahimbegovic, P. Moreno-Navaro, I. Rukavina, J.L. Perez-Aparicio, A. Ospina, ‘Thermodynamic framework and finite element computations for thermomechanics electromagnetic coupling’ Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  103. N. Dominguez, A. Ibrahimbegovic, C. Botello, ‘A b of resilience improvement program applied on a university urban region in Mexico City’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  104. P. Moreno-Navaro, A. Ibrahimbegovic, J.L. Perez-Aparicio, ‘Thermo-electro-elastoplastic formulation and implementation for pulsed Peltier cells’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  105. B. Rosic, M.S. Sarfaraz, H. Matthies, A. Ibrahimbegovic, ‘A computational perspective on stochastic upscaling in nonlinear multiscale problems’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  106. I. Imamovic, A. Ibrahimbegovic, E. Mesic, ‘Geometrically exact beam with combined hardening/ softening elastoplasticity’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  107. X.N. Do, A. Ibrahimbegovic, D. Brancherie, ‘Localized failure in dynamics for brittle and ductile materials’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  108. E. Hadzalic, A. Ibrahimbegovic, S. Dolarevic, M. Nikolic, ‘Macroscale response of dry and saturated soils subjected to footing load’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  109. A. Stanic, A. Ibrahimbegovic, B. Brank, ‘Multiscale failure models for 2D solids’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  110. T. Rukavina, A. Ibrahimbegovic, I. Kozar, ‘Modelling fibers in fiber-reinforced composites’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  111. A. Boujelben, A. Ibrahimbegovic, ‘Finite element analysis of three-dimensional solid element analysis with rotational degrees of freedom’; Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  112. I. Rukavina, A. Ibrahimbegovic, ‘Enhanced interface and operator split based software couplng for fluid-structure interaction’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  113. I. Rukavina, A. Ibrahimbegovic, L. A. Ospina-Vargas, P. Moreno-Navarro, ‘Comparison of alternative discretization and solution procedure for multiphysics problems’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  114. I. Kozar, T. Rukavina, A. Ibrahimbegovic, ‘Material model for load rate sensitivity’, Proceedings ECCOMAS MSF, Ljuljana, September 20-22, 2017
  115. B. Rosic, M.S. Sarfaraz, T. Moshagen, H. Matthies, A. Ibrahimbegovic, ‘A computational perspective on stochastic upscaling in nonlinear multiscale problems’, Proceedings COMPLAS 2017, Barcelona, September 3-7, 2017
  116. T. Moshagen, H.G. Matthies, A. Ibrahimbegovic, ‘Scale switching computations for heterogeneous inelastic materials’, Proceedings COMPLAS 2017, Barcelona, September 3-7, 2017
  117. M.S. Sarfaraz, B. Rosic, H.G. Matthies, A. Ibrahimbegovic, ‘Stochastic up-scaling of random heterogeneous materials’, Proceedings COMPLAS 2017, Barcelona, September 3-7, 2017
  118. M. Nikolic, J. Cesic, A. Ibrahimbegovic, Z. Nikolić, ‘Lattice model for failure based on embedded strong discontinuities in dynamic framework’, Proceedings COMPLAS 2017, Barcelona, September 3-7, 2017
  119. A. Ibrahimbegovic, ‘Heterogeneous2 Multiscale Method and Probability-Based Explanation to Size Effect in Localized Failure of Massive Structures’, CILAMCE 2016 – Iberian Latin-American Congress on Computational Methods in Engineering, Brasilia, Brazil, November 6-9, 2016
  120. M. Gueguin, H.P. Liurade, M.C. Nguyen, F. Hafid, C. Yang, S. Ammi, M. Nikolic, A. Ibrahimbegovic, ‘Integration of microscale behavior into meso and macroscale overhead power line finite element models, Proceedings MUMO 2016 Multiscale modelling of heterogeneous structures, September 21-23, Dubrovnik, Croatia
  121. M.S. Sarafarz, B. Rosic, H.G. Matthies, A. Ibrahimbegovic, ‘Probabilistic approach to multiscale modelling of concrete’, Proceedings MUMO 2016 Multiscale modelling of heterogeneous structures, September 21-23, Dubrovnik, Croatia
  122. A. Ibrahimbegovic, ‘Computations, Testing, Uncertainty Propagation and Size Effect in Localized Failure of Massive Composite Structures’, SEMC 2016, Cape Town, South Africa, September 5-7, 2016
  123. A. Ibrahimbegovic, ‘Coupled Problems Solution by Operator Split Methods and Efficient Software Development by Code-Coupling’, ACEM’16, Jeju, South Korea, Aug 29-September 1, 2016
  124. A. Ibrahimbegovic, ‘Multiscale Analysis of Cement Based Composites’, GRC ‘Advanced Materials for Sustainable Infrastructure Development’, Hong Kong, July 31-Aug 4, 2016
  125. A. Ibrahimbegovic, ‘Heterogeneous Multiscale Method: Computations, Testing, Uncertainty Propagation and Size Effect in Localized Failure’, WCCM 2016 World Congress on Computational Mechanics, Seoul, South Korea, July 24-29, 2016
  126. T. Rukavina, I. Kožar, A. Ibrahimbegovic,’ Voronoi cells for heterogeneous model of concrete with fibers’, 7th Congress CSM, Split, Croatia, June 16-17, 2016
  127. X.N. Do, A. Ibrahimbegovic, D. Brancherie, ‘Localized failure in dynamics for brittle and ductile materialls’, ICACM 2016 9th Symposium USA-France, Compiègne, June 1-3, 2016
  128. T. Rukavina, A. Ibrahimbegovic, I. Kozar, ‘Modeling of fiber reinforced concrete with Voronoi cells’, ICACM 2016 9th Symposium USA-France, Compiègne, June 1-3, 2016
  129. E. Marenic, A. Ibrahimbegovic, A. Hubert, ‘On finite element formulation for a 3D piezoelectric beam structures’, ICACM 2016 9th Symposium USA-France, Compiègne, June 1-3, 2016
  130. P. Moreno-Navarro, A. Ibrahimbegovic, J.L. Pérez-Aparicio, ‘Consistent formulation and finite element implementation of coupled thermo-electro-elastoplasticity’, ICACM 2016 9th Symposium USA-France, Compiègne, June 1-3, 2016
  131. A. Boujelben, A. Ibrahimbegovic, ‘Large Scale Offshore Floating Wind Turbines’, ICACM 2016 9th Symposium USA-France, Compiègne, June 1-3, 2016
  132. A. Ibrahimbegovic, ‘Mulitscale methods and probability based explanation of size effect in localized failure of heterogeneous composites’, ICACM 2016 9th Symposium USA-France, Compiègne, June 1-3, 2016
  133. A. Boujelben, A. Ibrahimbegovic, ‘Giant Offshore Wind Turbine’, JET 2016, Hammamet, Tunisie, May 3-5, 2016
  134. A. Ibrahimbegovic, ‘Multiscale and multiphysics nonlinear evolution problems in computational mechanics: Code-coupling strategy for efficient development of computer software’, JET 2016, Hammamet, Tunisie, May 3-5, 2016
  135. A. Ibrahimbegovic, M. Nikolic, E. Marenic, B. Ayhan, D. Brancherie, ‘Multiscale analysis of localized failure with coupled damge-plasticity and combined ED-FEM and X-FEM approach’, 8th Int. Cong. Croatian Soc. Mech., Opatija, Croatia, 29 September – 2 October 2015
  136. M. Nikolic, A. Ibrahimbegovic, ‘Rock mechanics model for simulation of fracture propagation based on embedded discontinuities’, COMPLAS-2015 Computational Plasticiy, Barcelona, Spain, 2-5 September 2015
  137. M. Lallam, S. Mamouri, A. Ibrahimbegovic, ‘Determination of fracture parameters in three-dimensional structure by the finite element method’, CFRAC-2015 4th Int. Conference on Computational Modeling of Fracture and Failure of Materials and Structures, June 15-18, 2015
  138. A. Stanic, B. Brank, J. Korelc, A. Ibrahimbegovic, ‘Tracing equilibrium path of structures with evolving cracks’, 2nd ECCOMAS MSF 2015 Conf. Multiscale Computations for Solids and Fluids, Sarajevo, 10-12 June 2015
  139. I. Imamovic, C. Konpf-Lenoir, B. Ayhan, A. Ibrahimbegovic, ‘Identification of constitutive parameters for coupled plasticity-damage and softening models’, 2nd ECCOMAS MSF 2015 Conf. Multiscale Computations for Solids and Fluids, Sarajevo, 10-12 June 2015
  140. E. Marenic, A. Ibrahimbegovic, ‘Multiscale elastic properties of graphene for moderate deformations’, 2nd ECCOMAS MSF 2015 Conf. Multiscale Computations for Solids and Fluids, Sarajevo, 10-12 June 2015
  141. M. Nikolic, S., A. Ibrahimbegovic, P. Miscevic, N. Stambuk, ‘Rock mechanics model capable of representing failure phenomena with pre-existing cracks and hydro-driven facture propagation’, 2nd ECCOMAS MSF 2015 Conf. Multiscale Computations for Solids and Fluids, Sarajevo, 10-12 June 2015
  142. E. Mourid, S. Mamouri, A. Ibrahimbegovic, ‘Analysis of geometric nonlinear instability for 2D frame structures using implicit high-frequency dissipative scheme’, 2nd ECCOMAS MSF 2015 Conf. Multiscale Computations for Solids and Fluids, Sarajevo, 10-12 June 2015
  143. A. Ibrahimbegovic, E. Hajdo, V.M. Ngo, S. Dolarevic, ‘Thermomechanical coupling and localized failure with nonlinear instability in finite deformation plasticity’, 2nd ECCOMAS MSF 2015 Conf. Multiscale Computations for Solids and Fluids, Sarajevo, 10-12 June 2015
  144. A. Ibrahimbegovic, R. Niekamp, H. Matthies, ‘Efficient development of software for nonlinear multiphysics problems by code-coupling’, 2nd ECCOMAS MSF 2015 Conf. Multiscale Computations for Solids and Fluids, Sarajevo, 10-12 June 2015
  145. B. Ayhan, A. Ibrahimbegovic, H. Engin, ‘Inelastic behavior of anisotropic ductile continuum damage’. ACE-2014 11th Int. Congress Advances Civil Eng., Istanbul, 21-25 October 2014
  146. S. Mamouri, F. Hammadi, A. Ibrahimbegovic, ‘Dynamic approach for nonlinear Instability analysis of 2D frame structures using geometrically exact beam’, ACMA 2014 –
  147. N. Friedman, A. Ibrahimbegovic, H.G. Matthies, ‘Stochastic Analysis of an Exotic Deployable Space Truss System’, IABSE Symposium, Madrid, 3-5 September 2014
  148. A. Ibrahimbegovic, ‘Multi-scale computations for nonlinear, coupled and interaction problems with operator split methods’, ACEM14 Advances in Civil, Environmental and Materials, Busan, Korea, August 24-28, 2014
  149. N. Dominguez, A. Tena, A. Ibrahimbegovic, ‘Proposal of resilience plan for a metropolitan region in Mexico City coupling different extreme hasards’, ACEM14 Advances in Civil, Environmental and Materials, Busan, Korea, August 24-28, 2014
  150. B. Ayhan, A. Ibrahimbegovic, ‘Material modelling for metals considering dynamic plasticity’ 11th World Congress on Computational Mechanics (WCCM XI) July 20-25, 2014, Barcelona, Spain
  151. S. Mamouri, A. Ibrahimbegovic, ‘Study of geometric nonlinear instability of 2d frame structure using dynamics analysis and nonlinear damping’, WCCM XI -11th World Congress on Computational Mechanics/ ECCM V 5th European Conference on Computational Mechanics, Barcelona, Spain, July 20-25, 2014
  152. E. Marenic, J. Soric, A. Ibrahimbegovic, ‘Homogenized elastic properties of grapheme for large deformations’, WCCM XI -11th World Congress on Computational Mechanics/ ECCM V 5th European Conference on Computational Mechanics, Barcelona, Spain, July 20-25, 2014
  153. E. Marenics, J. Soric, A. Ibrahimbegovic, ‘Multiscale modeling of biaxial deformation of graphene’, 6th Colloquium of Croatian Society of Mechanics, Ma9 29-30, 2014
  154. J. Dujc, B. Brank, A. Ibrahimbegovic, ‘Coupling of shell and beam computational models in failure analysis of steel frames’, The 10th Conference ‘Shell Structures, Theory and Applications’, Gdansk, Poland, October 16-18, 2013
  155. N. Dominguez, A. Tena, A. Ibrahimbegovic, ‘Proposal for Resilience Plan for Metropolitan Region of Mexico City’, XIX Congreso Nacional de Ingenieria sismica, Boca Del Rio Veracruz, Mexico, November 6-9, 2013
  156. B. Brank, M. Jukic, J. Dujc, A. Ibrahimbegovic, ‘Numerical Simulation of Failure in Brittle and Ductile Materials by Embedded Discontinuity Finite Elements’, CanCNSM-2013 Canadian Conf. on Nonlinear Solid Mechanics, Montreal, Canada, July 23-26, 2013
  157. B.V. Rosic, H.G. Matthies, M. Zivkovic, A, Ibrahimbegovic, ‘Uncertainty Quantification Methods for Elastoplastic Problems Described by Uncertain Parameters’, Proceedings COMPLAS XII Int. Conf. on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, September 3-5, 2013
  158. T. Saksala, A. Ibrahimbegovic, ‘Anisotropic viscodamage-viscoplastic consistency model with a parabolic cap for rocks’, Proceedings COMPLAS XII Int. Conf. on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, September 3-5, 2013
  159. A. Ibrahimbegovic, ‘Multiscale plasticity models of concrete capable of providing size effect, crack spacing and opening’, Proceedings COMPLAS XII Int. Conf. on Computational Plasticity: Fundamentals and Applications, Barcelona, Spain, September 3-5, 2013
  160. A. Ibrahimbegovic, ‘Probabilistic multiscale methods for dealing with localized failure of heterogeneous structures capable of capturing size effect’, Proceedings Seventh M.I.T. Conference on Computational Fluid and Solid Mechanics: Focus on Multiscale and Multiphysics Problems, Boston, USA, June 12 – 14, 2013
  161. N. Friedman, M. Weiner, H. Matthies, A. Ibrahimbegovic, ‘Stochastic Analysis of the Deployment Pattern of an Antiprismatic Deployable Space Truss System’, GAMM-2013 Conference, Novi Sad, Srbia, March 18-22, 2013
  162. A. Ibrahimbegovic, M. Ngo, D. Brancherie, ‘Plasticity model for localized failure with thermomechanical coupling’, Proceedings Coupled Problems, Ibiza, Spain, June 15-17, 2012
  163. P. Jehel, A. Ibrahimbegovic, P. Leger, ‘Efficient Inelastic Fiber Frame Element and Consistent Damping Model for Seismic Time-History Analyses’, Proceedings 15th WCEE, Lisbon, Portugal, September 24-28, 2012
  164. B. Brank, A. Ibrahimbegovic, J. Dujc, ‘Multi-scale model for failure and instability computation of metal frames’, ECCOMAS 2012: Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, September 10-14, 2012
  165. A. Ibrahimbegovic, ‘Failure models for prediction of crack-spacing and opening for reinforced composites with long fibers and probability framework’, ECCOMAS 2012: Congress on Computational Methods in Applied Sciences and Engineering, Vienna, Austria, September 10-14, 2012
  166. A. Ibrahimbegovic, ‘Anisotropic failure model for two-phase composite materials and probabilistic interpretation of size effect’, WCCM-10: 10th World Congress on Computational Mechanics, Sao Paolo, Brasil, July 8-13, 2012
  167. N.Q. Thai, A. Ibrahimbegovic, ‘Goal-oriented a posteriori error estimation for the finite element method in 1D contact’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  168. Ayhan B., P. Jehel, A. Ibrahimbegovic, ‘The energy dissipation in metal membrane under cyclic loading’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  169. M. Ngo, A. Ibrahimbegovic, D.Brancherie, ‘A thermo-damage coupling model for concrete structure’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  170. C. Kassiotis, A. Ibrahimbegovic and H. G. Matthies, ‘Efficient coupling algorithms for free-surface flow impacting complexe structures’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  171. M. Jukić, J. Dujc, A. Ibrahimbegovic, B. Brank, ‘Failure Analysis of Structural Elements by Embedded Discontinuity Concept’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  172. A. Ibrahimbegovic, R.L. Taylor, ‘On objectivity of finite rotation beam formulation and its finite element implementation’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  173. N. Friedman, K. Gidófalvy, I. Hegedűs, Gy. Farkas, A. Ibrahimbegovic, ‘Deployment analysis of an antiprismatic snap-through type cylindrical space truss and proposal for a pop-up bridge construction’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  174. U. Bohinc, A. Ibrahimbegovic, B. Brank, ‘Estimation of discretization error in plate computations by equilibrated residuals method’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  175. B.H. Pham, D. Brancherie, L. Davenne, A. Ibrahimbegovic, ‘Embedded discontinuities for ultimate load computation of reinforced concrete frames’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  176. M. Asali, A. Ibrahimbegovic, H.G. Matthies, ‘Adaptive multiscale strategy for efficient computation of complex heterogeneous structures till failure’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  177. A. Ibrahimbegovic, ‘Composite Structures with Long Fiber Reinforcement: Failure Models for Prediction of Crack-Spacing and Opening’, IASS-IACM 2012: 7th Int. Conference on Computational Mechanics for Spatial Structures, Sarajevo, Bosnia, April 2-4, 2012
  178. A. Ibrahimbegovic, C. Kassiotis, H. Matthies, ‘Tsunami impact on coastal structures: Patitioned solution procedure for fluid-structure interaction with free-surface flow’, Int. Symposium on Eng. Lessons Learned from the Giant Earthquake, Tokyo Japan, March 2-4, 2012
  179. A. Ibrahimbegovic, ‘Composites with long fibers: failure models for prediction of crack spacing and opening’, ASEM’11plus: The First World Congress on Advances in Structural Engineering and Mechanics, Seoul, South Korea, September 18-23, 2011
  180. N. Benkemoun, J.B. Colliat, A. Ibrahimbegovic, ‘Multi-scale failure model for heterogeneous materials’, COMPLAS XI Int. Conference on Computational Plasticity, Barcelona, Spain, September 7-9, 2011
  181. A. Ibrahimbegovic, ‘Performance Based Earthquake Resistant Design: Migrating Towards Nonlinear Models and Probabilistic Framework’, Bled-4 Workshop ‘Performance Based Seismic Engineering – Vision for an Earthquake Resilient Society: A tribute to the work of Peter Fajfar and Helmut Krawinkler’, Slovenia, June 24-27, 2011
  182. A. Ibrahimbegovic, ‘Failure models for quasi-brittle materials with or without reinforcement capable of predicting crack-spacing and opening’, 6th MIT Conference on Computational Fluid and Solid Mechanics, MIT, Boston, USA, June 15-17, 2011
  183. C. Kassiotis, A. Ibrahimbegovic, H. Matthies, ‘Coupling Finite Elements and Finite Volumes for Fluid-Structure Interaction: Algorithms, Stability Analysis, Implementation and Examples Dealing With Free-Surface Flows’, 4th Int. Conference on Computational Methods for Coupled Problems, Kos Island, Greece, June 20-22, 2011
  184. N. Benkemoun, J.B. Colliat, A. Ibrahimbegovic, ‘Enhanced finite element for modeling localized failure of heterogeneous materials’, 10th CSMA French National Congress in Computational Mechanics, Giens, May 9-13, 2011
  185. D. Brancherie, B.H. Pham, L. Davenne, A. Ibrahimbegovic, ‘Ultimate load analysis of reinforced-concrete-frames’, 10th CSMA French National Congress in Computational Mechanics, Giens, May 9-13, 2011
  186. B. Ayhan, P. Jehel, A. Ibrahimbegovic, H. Engin, ‘Coupled Damage-Plasticity Based Constitutive Modeling of Metallic Membrane Element Under Cyclic Loading’, COMPDYN 2011 Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece, May 26-28, 2011
  187. P. Jehel, P. Leger, A. Ibrahimbegovic, ‘Modeling seismic energy dissipation: a paradigm for performance-based design of RC frame structures’, COMPDYN 2011 Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece, May 26-28, 2011
  188. V.M. Ngo, P. Jehel, A. Ibrahimbegovic Numerical Modeling of Monotonic and Cyclic Response of Anchorage Steel Bars, Workshop on Construction under Exceptional Condition, Hanoi, Vietnam, October 29-31, 2010
  189. N.Q. Thai, A. Ibrahimbegovic, Analysis of improved implicit integrators and conserving algorithms for frictionless dynamic contact and impact problems, Workshop on Construction under Exceptional Condition, Hanoi, Vietnam, October 29-31, 2010
  190. B.H. Pham, L. Davenne, D. Brancherie, A. Ibrahimbegovic, Stress-Resultant model for ultimate load design reinforced-concrete frames: combine axial force and bending moment, Workshop on Construction under Exceptional Condition, Hanoi, Vietnam, October 29-31, 2010
  191. A. Ibrahimbegovic, D. Brancherie, J-B. Colliat, L. Davenne, D. Markovic, G. Herve, P. Villon, A. Kucerova, N. Dominguez, S. Melnyk, M. Hautefeuille, A. Boulkertous, C. Kassiotis, B-H. Pham, P. Jehel, N. Benkemoun, ‘Nonlinear Analysis of Structures under Extreme Conditions: Plane Crash with Explosions, Fires, Wind Storms, Earthquakes with Tsunamis’, Workshop on Construction under Exceptional Condition, Hanoi, Vietnam, October 29-31, 2010
  192. Benkemoun N., Colliat J.B., Ibrahimbegovic A.. Approche multi-échelle séquencée: application aux matériaux cimentaires, Conf. RF2B Regroupement Francophone pour la Recherche et la Formation sur le Béton. Quebec (Canada). August 26-27, 2010
  193. A. Ibrahimbegovic, H. Matthies, ‘Heterogeneous materials and failure with size effect’, WCCM-9 Ninth World Congress on Computational Mechanics, Sydney, Australia, July 16-21, 2010
  194. L. Davenne, A. Boulkertous, A. Ibrahimbegovic, ‘Influence of steel-concrete bond-slip on the behavior or RC structure under severe conditions’, CONSEC10 Sixth International Conference on Concrete Under Severe Conditions, Environment and Loading, Yucatan, Mexico, June 7-9, 2010
  195. N. Benkemoun, M. Hautefeuille, J.B. Colliat, A. Ibrahimbegovic, ‘Multi-scale strategy for heterogeneous material with localized failure’, ECCM-2010 Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France, May 16-21, 2010
  196. C. Kassoitis, A. Ibrahimbegovic, H. Matthies, ‘A componentwise implementation of partitioned strategy for fluid-structure interaction and its application to sloshing waves impacting structures’, ECCM-2010 Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France, May 16-21, 2010
  197. M. Hautefeuille, J.B. Colliat, A. Ibrahimbegovic, H. Matthies, ‘Multi-scale strategy for heterogeneous materials with localized failure’, ECCM-2010 Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France, May 16-21, 2010
  198. L. Desvillettes, A. Ibrahimbegovic, ‘Micro-macro scale coupling and transition in solid and fluid mechanics’, ECCM-2010 Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France, May 16-21, 2010
  199. A. Ibrahimbegovic, H. Matthies, J.B. Colliat, R. Niekamp, ‘Computational mechanics of heterogeneous materials and failure with size effect’, ECCM-2010 Fourth European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France, May 16-21, 2010
  200. A. Ibrahimbegovic, ‘Discrete models for static and dynamics failure’, BICTAM Symposium on Meshfree/Meshless, Particle and Generalized/Extended Finite Element Methods, Nanjing, China, Octobre 12-16, 2009
  201. B. Rosic, H. G. Matthies, M. Zivkovic and A. Ibrahimbegovic. Stochastic Plasticity. 6th International Congress of Croatian Society of Mechanics, 6th ICCSM, Dubrovnik, Croatia, October 2009.
  202. H.G. Matthies, C. Kassiotis, A. Ibrahimbegovic, R. Niekamp, D. Jurgens, ‘Elements of computational framework for coupled simulations’, ICCSM, Dubrovnik, Octobre 2009
  203. N.Benkemoun, M.Hautefeuille, J-B.Colliat, A.Ibrahimbegovic, ‘Heterogeneous Materials Failure: 3D Meso-Scale Modeling with Embedded Discontinuities’, COMPLAS X- Comput. Plasticity, September 3-5, 2009
  204. B.Rosic, H.G.Matthies, M.Zivkovic, A.Ibrahimbegovic, ‘Formulation and Computational Application of Inelastic Media with Uncertain Parameters’, COMPLAS X- Comput. Plasticity, September 3-5, 2009
  205. N. Dominguez, L. Davenne, A. Ibrahimbegovic, ‘Development of enhanced element for modeling of reinforced-concrete structures’, 7th EUROMECH Solid Mechanics Conference, Lisbon, Portugal, September 7-11, 2009
  206. L. Davenne, A. Boulkertous, A. Ibrahimbegovic, D. Brancherie, ‘Influence de liaison acier-béton sur la fissuration des structures en béton-armé’, 19ème Congrès Français de Mécanique, August 24-28, 2009, Marseille
  207. A. Ibrahimbegovic, J.B. Colliat, M. Hautefeuille, N. Benkemoun, ‘Multiscale approach with uncertainty for nonlinear inelastic behavior of heterogeneous material and related size effect’, SEECCM-2009 2nd South-East European Conference on Computational Mechanics, June 22-24, 2009
  208. B. Rosic, H. Matthies, M. Zivkovic, A. Ibrahimbegovic, ‘Uncertainty and plasticity: formulation and computations’, SEECCM-2009 2nd South-East European Conference on Computational Mechanics, June 22-24, 2009
  209. L. Davenne, A. Boulkertous, A. Ibrahimbegovic, ‘Influence of the steel-concrete bond-slip on the seismic behavior of RC structures’, COMPDYN 2009- 2nd International Conference on Computational Dynamics and Earthquake Engineering, June 22-24, 2009
  210. P. Jehel, A. Ibrahimbegovic, P. Leger, L. Davenne, ‘A new fiber element for refined nonlinear modeling of RC frame structures in seismic loading’, COMPDYN 2009- 2nd International Conference on Computational Dynamics and Earthquake Engineering, June 22-24, 2009
  211. H.G. Matthies, R. Niekamp, M. Hautefeuille, D. Jurgens, C. Kassiotis, T. Srisupattarawanit, J-B. Colliat, A. Ibrahimbegovic, ‘The mechanics of coupling – ingredients of coupled calculations’, Int. Conference on Coupled Problems in Science and Engineering, Ischia, Italy, June, 2009
  212. J.B. Colliat, N. Benkemoun, M. Hautefeuille, A. Ibrahimbegovic, ‘Modélisation meso-scopic de la fissuration des matériaux hétérogènes’, 27ème Rencontres de l’Association Universitaire de Génie Civil, Saint-Malo, June 3-5, 2009
  213. A. Boulkertous, L. Davenne, A. Ibrahimbegovic, ‘Un élément fini encapsulé pour la modélisation des structures en béton-armé sous chargement thermomécanique’, 27ème Rencontres de l’Association Universitaire de Génie Civil, Saint-Malo, June 3-5, 2009
  214. N. Benkemoun, M. Hautefeuille, J-B. Colliat, A. Ibrahimbegovic, ‘Modélisation multi-échelle du comportement adoucissant des matériaux à base cimentaire’, CSMA Colloque national en calcul des structures, Giens, May 25-29, 2009
  215. C. Kassiotis, A. Ibrahimbegovic, H. Matthies, ‘Utilisation de la technologie de compsantes pour la résolution des problèmes d’interaction fluide-structure’, CSMA Colloque national en calcul des structures, Giens, May 25-29, 2009
  216. N. Dominguez, M.A. Fernandez, A. Ibrahimbegovic, ‘Development of an Enhanced Solid Element for Non-Linear modeling of Reinforced Concrete structures’, CTCS’09 : The 1st International Conference on Computational Technologies in Concrete Structures, Jeju, South Korea, May 24-27, 2009
  217. A. Ibrahimbegovic, M. Hautefeuille, N. Benkemound, J-B. Colliat, D. Markovic, ‘Multiscale FE Model for Multiscale Analysis of Concrete’, CTCS’09 : The 1st International Conference on Computational Technologies in Concrete Structures, Jeju, South Korea, May 24-27, 2009
  218. A. Ibrahimbegovic, D. Brancherie, L. Davenne, N. Dominguez, S. Melnyk, ‘Solid FE model for computing failure load of concrete and RC structures’, CTCS’09 : The 1st International Conference on Computational Technologies in Concrete Structures, Jeju, South Korea, May 24-27, 2009
  219. A. Ibrahimbegovic, ‘Computational mechanics of concrete and reinforced concrete structures: from material heterogeneities to structural failure with size effect’, CTCS’09 : The 1st International Conference on Computational Technologies in Concrete Structures, Jeju, South Korea, May 24-27, 2009
  220. G. Casaux, F. Ragueneau, J. Mazars, A. Ibrahimbegovic, ‘3D modelling of reinforced-concrete structures under seismic loading’, Workshop RF2B, Cachan, 2002
  221. C. Austruy, C. Kassiotis, J.B. Colliat, A. Ibrahimbegovic, H. Matthies, F. Dias, ‘A multiscale and multiphysics approach to quantify waves damping by structures’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  222. N. Benkemoun, M. Hautefeuille, J.B. Colliat, A. Ibrahimbegovic, ‘Heterogeneous materials failure using three-dimensional lattice models’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  223. A. Boulkertous, L. Davenne, A. Ibrahimbegovic, ‘Damage in RC structures and crack spacing under severe thermo-mechanical loading conditions’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  224. D. Brancherie, A. Kucerova, A. Ibrahimbegovic, ‘Continuum-discrete damage model identification from structural testing’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  225. L. Davenne, A. Boulkertous, P. Jehel, B.H. Pham, A. Ibrahimbegovic, ‘Earthquake analysis of RC structures using macro-elements’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  226. S. Dolarevic, A. Ibrahimbegovic, ‘Nonlinear behavior of soils as the main source of structural damage’ Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  227. N. Friedman, A. Ibrahimbegovic, G. Farkas, L. Davenne, ‘Quick construction by deployable structures’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  228. M. Hautefeuille, J.B. Colliat, A. Ibrahimbegovic, H. Matthies, ‘Multi-scale zoom capabilities for damage assessment in structures’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  229. P. Jehel, A. Ibrahimbegovic, P. Leger, L. Davenne, ‘Three-scale nonlinear analysis until collapse for a priori damage assessment of RC frame elements in seismic loading’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  230. B.H. Pham, D. Brancherie, L. Davenne, A. Ibrahimbegovic, ‘Finite element method for computing the Timoshenko beam-column with embedded rotation discontinuity’, Proceedings NATO-ARW, Sarajevo, October 5-9, 2008
  231. M. Hautefeuille, J.B. Colliat, A. Ibrahimbegovic, ‘On multiscale framework to model heterogeneous materials with strongly coupled scales’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  232. A. Ibrahimbegovic, A. Boulkertous, L. Davenne, ‘Operator split FE solution method for RC structures’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  233. A. Ibrahimbegovic, D. Brancherie, S. Melnyk, D. Markovic, ‘Multiscale approach for nonlinear inelastic behavior of heterogeneous materials’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  234. C. Kassiotis, A. Ibrahimbegovic, H. Matthies, ‘Model tsunami impact on coastal protections by a multi-scale partitioned strategy’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  235. P. Jehel, A. Ibrahimbegovic, P. Leger, L. Davenne, ‘On the computation of seismic energy dissipation in RC frames’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  236. N. Dominguez, E. Flores, A. Ibrahimbegovic, ‘Effects of heterogeneities in dynamical response of reinforced-concrete structures’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  237. J. Dujc, B. Brank, A. Ibrahimbegovic, ‘Modeling discontinous failure in beams and plates’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  238. Bohinc, A. Ibrahimbegovic, B. Brank, ‘Modeling error estimates for plate bending models based on local Neumann problem’, Proceedings WCCM-8 World Congress on Computational Mechanics/ ECCOMAS-08, Venice, June 30-July 4, 2008
  239. J. Dujc, B. Brank, A. Ibrahimbegovic, ‘Analysis of localized failure in metal beams and plates’, Proceedings IASS-IACM 6th International Conference on Shells and Spatial Structures “Spanning Nano to Mega”, Cornell University, Ithaca, USA, May 28-31, 2008
  240. U. Bohinc, B. Brank, A. Ibrahimbegovic, B. Brank, ‘Modelling and mesh error estimates for plates and thick shells’, Proceedings IASS-IACM 6th International Conference on Shells and Spatial Structures “Spanning Nano to Mega”, Cornell University, Ithaca, USA, May 28-31, 2008
  241. A. Ibrahimbegovic, B. Brank, ‘Finite rotation parameters in statics and dynamics’, Proceedings IASS-IACM 6th International Conference on Shells and Spatial Structures “Spanning Nano to Mega”, Cornell University, Ithaca, USA, May 28-31, 2008
  242. Ibrahimbegovic, L. Davenne, A. Boulkertous, P. Jehel, J. Lacoue, F. Tarrallo, J. Richard, ‘FE solid model for RC structures providing detailed representation of local failure mechanisms’, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 28-30, November 2007
  243. M. Hautefeuille, J.B. Colliat, S. Melnyk, A. Ibrahimbegovic, ‘Probabilistic laws identification of heterogeneous materials plastic behavior properties, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 103-107, November 2007
  244. M. Hautefeuille, A. Ibrahimbegovic, J.B. Colliat, D. Markovic, P. Villon, ‘On general primal/dual multi-scale framework to model heterogeneous materials, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 109-114, November 2007
  245. U. Bohinc, A. Ibrahimbegovic, B. Brank, ‘Adaptive multi-modle analysis of plate structures’, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 38-43, November 2007
  246. C. Kassiotis, A. Ibrahimbegovic, H. Matthies, ‘Multiscale computations in time for nonlinear coupled problems by a partitioned approach’, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 141-145,November 2007
  247. D. Brancherie, A. Kucerova, A. Ibrahimbegovic, ‘Multiscale continuum-discrete damage model: formulation and parameter identification’, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 45-50, November, 2007
  248. C. Kassiotis, D. Dutykh, F. Dias, A. Ibrahimbegovic, ‘A partitioned approach to model tsunami impact on coastal protections’, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 147-152, November 2007
  249. P. Jehel, A. Ibrahimbegovic, P. Leger, L. Davenne, ‘Multi-scale modeling of RC structural frame elements in cyclic loading’, Proceedings ECCOMAS Thematic Conference on Multiscale Methods in Solids and Fluids, Cachan, pp 126-131, November 2007
  250. A. Ibrahimbegovic, B. Brank, Shell model representation for finite rotations and finite strains, ANASS 2007 Advanced Numerical Analysis of Shell-like Structures, Zagreb, September 2007
  251. B. Brank, M. Kegl, A. Ibrahimbegovic, Classical Higher-Order Shell Formulations, ANASS 2007 Advanced Numerical Analysis of Shell-like Structures, Zagreb, September 2007
  252. A. Ibrahimbegovic, L. Davenne, A. Boulkertous and P. Jehel, Solid FE model for RC structures with inside detailed information, COMPLAS IX International Conference on Computational Plasticity Conference, Barcelona, September 2007
  253. A. Ibrahimbegovic, D. Brancherie, J-B. Colliat, A. Kucerova, S. Melnyk P and D. Markovic, FE computational algorithms for nonlinear inelastic behavior of heterogeneous materials, COMPLAS IX International Conference on Computational Plasticity Conference, Barcelona, September 2007
  254. M. Hautefeuille, S. Melnyk, J-B. Colliat, H.G. Matthies, A. Ibrahimbegovic, ‘A Computational Approach for Probabilistic Laws Identification of Heterogeneous Materials Plastic Behavior Properties’, COMPLAS IX International Conference on Computational Plasticity Conference, Barcelona, September 2007
  255. B. Rosic, H. Matthies, M. Zivkovic, A. Ibrahimbegovic, ‘Formulation of a Heterogeneous Stochastic Elasto-Plastic Material Model’, COMPLAS IX International Conference on Computational Plasticity Conference, Barcelona, September 2007
  256. A. Kucerova, Z. Bittnar, D. Brancherie, A. Ibrahimbegovic, J. Zeman, ‘On the calibration of continuum-discrete damage model capable of representing heterogeneous strain field in localized failure’, USNCCM9 – US National Congress on Computational Mechanics, San Francisco, July 16-20, 2007
  257. D. Brancherie, A. Ibrahimbegovic, ‘Fracture of massive structures: an approach to constructing an anisotropic damage combining continuum-type hardening and discrete-type softening models’, Conf. Internationale de modélisation thermo-mécanique, Ecole Polytechnique, France, July 9-12, 2007
  258. P. Jehel, A. Ibrahimbegovic, P. Leger, L. Davenne, ‘Modélisation multi-échelle de l’amortissement dans les poutres en béton-armé’, Colloque AFPS, EC Paris, July 3-5, 2007
  259. M. Hautefeuille, J.B. Colliat, S. Melnyk, A. Ibrahimbegovic, ‘Probabilistic aspects for heterogeneous materials failure’, ECCOMAS Thematic Conference on Modeling of Heterogeneous Materials, Prague, June 25-27, 2007
  260. A. Kucerova, D. Brancherie, A. Ibrahimbegovic, J. Zeman, Z. Bittnar, ‘Parameter identification of continuum-discrete damage model capable of representing heterogeneous strain field in localized failure’, ECCOMAS Thematic Conference on Modeling of Heterogeneous Materials, Prague, June 25-27, 2007
  261. S. Melnyk, J.B. Colliat, M. Hautefeuille, A. Ibrahimbegovic, ‘Structures meshes for heterogeneous materials failure model’, ECCOMAS Thematic Conference on Modeling of Heterogeneous Materials, Prague, June 25-27, 2007
  262. A. Ibrahimbegovic, C. Kassiotis, ‘Nonlinear dynamics of multibody systems: time-integration schemes and uncoupled computations’, ECCOMAS Thematic Conference on Multibody Dynamics, Milan, Italy, June 25-28, 2007
  263. L. Davenne, A. Boulkertous, A. Ibrahimbegovic, ‘Model reduction strategy for dynamic analysis of structures under various seismic signals’, Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN), Rethymnon, Crete, Greece, June 13-17, 2007.
  264. A. Boulkertous, L. Davenne, A. Ibrahimbegovic, ‘An integrated RC finite element including steel-concrete-bond slip’, Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN), Rethymnon, Crete, Greece, June 13-17, 2007.
  265. P. Jehel, A. Ibrahimbegovic, P. Leger, L. Davenne, ‘Numerical Multi-Scale Modeling of RC Elements under Seismic Loading Including Damping’, Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN), Rethymnon, Crete, Greece, June 13-17, 2007.
  266. A. Ibrahimbegovic, ‘Nonlinear dynamics and finite element time-space field transfer for weak scale coupling’, Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN), Rethymnon, Crete, Greece, June 13-17, 2007
  267. A. Ibrahimbegovic, J-B. Colliat, M. Hautefeuille, A. Kucerova , S. Melnyk P, ‘Modèles numériques multi-échelles du comportement inélastique des matériaux hétérogènes et prise en compte des aspects probabilistes, CSMA Colloque national en calcul des structures, Giens, May, 2007
  268. C. Kassiotis, J.B. Colliat, A. Ibrahimbegovic, H. Matthies, ‘Strongly coupled solution procedures for DAE framework, ECCOMAS Thematic Conference on Coupled Problems, Ibiza, May, 2007
  269. A. Ibrahimbegovic, ‘Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle material’, Actes de Journée CSMA, Multi-fissuration, fragmentation et methods particulaires’, Montpellier, December 8, 2006
  270. A. Kucerova, D. Brancherie, A. Ibrahimbegovic, ‘Material parameter identification for damage models with cracks’, Proceedings CST-2006. Los Palmas, Spain, September 12-15, 2006
  271. A. Ibrahimbegovic, D. Markovic, S. Melnyk, ‘Modèles numériques multi-échelles du comportement anélastique des matériaux et leurs applications en analyse non linéaire et en conception optimale’, 8ème Colloque franco-roumain de mathematiques appliquées, Chambéry, August 28 – September 1, 2006
  272. A. Ibrahimbegovic, J.B. Colliat, L. Davenne, A. Boulkertous, D. Markovic ‘Operator split time-integration scheme for thermomechanical coupling of structures with inelastic behavior’, Proceedings WCCM VII, Los Angeles, USA, July, 2006
  273. A. Ibrahimbegovic, M. Hautefeuille, J.B. Colliat, R. Niekamp, H. Matthies, ‘Multi-scale analysis for nonlinear heterogeneous materials and probabilistic aspects’, Proceedings WCCM VII, Los Angeles, USA, July, 2006
  274. A. Ibrahimbegovic, D. Markovic, L. Davenne, J.B. Colliat, A. Kucerova, S. Melnyk, ‘Multi-scale and multi-physics nonlinear analysis of material inelastic constitutive behavior, design, control and optimization’, Proceedings SEECCM-06 First South-East European Conference on Computational Mechanics, Kragujevac, Serbia, June 28-30, 2006
  275. A. Ibrahimbegovic, ‘Multi-scale analysis, design and identification of heterogeneous materials with inelastic behavior’, XVI Convengno Italiano de Meccanica Computazionale, Bologna, June 26-28, 2006
  276. A. Ibrahimbegovic, ‘Multi-scale models and asymptotic analysis’, in Workshop on ‘Asymptotic methods’, Mathematical Institute, Oberwolfach, Germany, June 12-14, 2006
  277. B. Brank, A. Ibrahimbegovic, U. Bohinc, ‘Finite deformation plasiticity formulation for shells’, Proceedings ECCM, Lisbon, June 5-9, 2006
  278. J.B. Colliat, M. Krosche, M. Krosche, M. Hautefeuille, A. Ibrahimbegovic, H. Matthies, ‘Stochastic analysis of coupled thermo-mechanical problem: SFEM model’, Proceedings ECCM, Lisbon, June 5-9, 2006
  279. D. Brancherie, P. Villon, A. Ibrahimbegovic, ‘Efficient method for ultimate load computation of a complex structure based on remeshing technique’, in Proceedings NATO-ARW ‘Extreme man-made and natural hazards in dynamics of structures’, Opatija, Croatia, May 28- June 1, 2006’
  280. U. Bohinc, A. Ibrahimbegovic, B. Brank, ‘Adaptive finite element modeling of plates’, in Proceedings NATO-ARW ‘Extreme man-made and natural hazards in dynamics of structures’, Opatija, Croatia, May 28- June 1, 2006’
  281. M. Hautefeuille, J.B. Colliat, A. Ibrahimbegovic, Stochastic approach for quasi-brittle failure of concrete structures, in Proceedings NATO-ARW ‘Extreme man-made and natural hazards in dynamics of structures’, Opatija, Croatia, May 28- June 1, 2006’’
  282. S. Dolarevic, A. Ibrahimbegovic, ‘Complex problem solving in soil-structure interaction using a modified cap elastoplastic model’, in Proceedings NATO-ARW ‘Extreme man-made and natural hazards in dynamics of structures’, Opatija, Croatia, May 28- June 1, 2006’
  283. A. Kucerova, J. Zemin, A. Ibrahimbegovic, ‘Parameter identification procedures for constitutive models of heterogeneous materials from structural testing’, in Proceedings NATO-ARW ‘Extreme man-made and natural hazards in dynamics of structures’, Opatija, Croatia, May 28- June 1, 2006’
  284. D. Markovic, A. Boulkertous, A. Ibrahimbegovic, ‘Model reduction strategy for transient analysis of large structures with nonlinear inelastic behavior’’, in Proceedings NATO-ARW ‘Extreme man-made and natural hazards in dynamics of structures’, Opatija, Croatia, May 28- June 1, 2006’
  285. S. Melnyk, J.B. Colliat, A. Ibrahimbegovic, ‘On modeling localized failure in complex heterogeneous structures.’ in Proceedings NATO-ARW ‘Extreme man-made and natural hazards in dynamics of structures’, Opatija, Croatia, May 28- June1, 2006’
  286. A. Ibrahimbegovic, D. Brancherie, G. Hervé and P. Villon, ‘Weak scale coupling and finite element time-space field transfer in nonlinear dynamics and ultimate load computation’, Conf. ‘Challenges in Computational Mechanics’ (in honor of P. Ladevèze 60th birthday), Cachan, France, May 2006
  287. Ibrahimbegovic, D. Markovic, ‘Multi-scale modeling of inelastic material behavior and its applications to nonlinear analyses and design of structures’, Preceedings First Euro Mediterrean Conference in Advances on Geomaterials and Strctures, Hammamet, Tunisia, May 3-5, 2006
  288. L. Davenne, J.B. Colliat, A. Ibrahimbegovic, ‘Fire resistance of masonry structures and multi-scale modeling in time’, Proceedings First Euro Mediterrean Conference in Advances on Geomaterials and Structures, Hammamet, Tunisia, May 3-5, 2006
  289. D. Brancherie, P. Villon and A. Ibrahimbegovic. Description of failure for non linear structures: a filed transfer based on diffuse approximation. 9th ESAFORM Conference on Metal Forming. Glasgow, Scotland, April 2006.
  290. U. Bohinc, A. Ibrahimbegovic, ‘Robust plate finite elements’, Congress of Slovenain Society of Mechanics, Ljubljana, Slovenia, October 2005
  291. D. Markovic, A. Ibrahimbegovic, ‘Strategie de calcul multi-échelles pour les comportements non-linéaires des structures hétérogènes’, Congrès francais de mécanique, Troyes, France, September, 2005
  292. N. Dominguez, D. Brancherie, L. Davenne, A. Ibrahimbegovic, ‘Modélisation du béton armé en prenant en compte la rupture d’adhérence’, Congrès francais de mécanique, Troyes, France, September, 2005
  293. A. Ibrahimbegovic, D. Markovic, H.G. Matthies, R. Niekamp, R.L. Taylor, ‘Multi-scale modeling of heterogeneous structures with inelastic constitutive behavior’, COMPLAS 8 Conference, Barcelona, Spain, September 2005
  294. N. Dominguez, D. Brancherie, L. Davenne, A.Ibrahimbegovic, ‘Modeling of inelastic response of thick shell with enhanced solid elements’, Complas 8 Conference, Barcelona, Spain, September 2005
  295. B. Brank, A. Ibrahimbegovic, U. Bohinc, ‘Finite deformation plasticity in 3D shell model’, Complas 8 Conference, Barcelona, Spain, September 2005
  296. A. Ibrahimbegovic, B. Brank, U. Bohinc ‘On theoretical formulation and finite element implementation of 3D shell model’, Complas 8 Conference, Barcelona, Spain, September 2005
  297. D. Brancherie, P. Villon, A. Ibrahimbegovic, ‘Remeshing strategy based on diffuse approximation transfer operator’, Complas 8 Conference, Barcelona, Spain, September 2005
  298. Ibrahimbegovic, R.L. Taylor, A. Kucerova, ‘Nonlinear dynamics of flexible multibody systems: computational cost reduction and control of deployment sequence’, ECCOMAS Thematic Conf., Madrid, Spain, June 2005
  299. Ibrahimbegovic, ‘Nonlinear dynamics of structures and flexible multibody systems: computatoinal procedure for spanning the scales’, Proceedings 3rd MIT Conference in Computational Fluid and Solid Mechanics, Boston, June 2005
  300. D. Brancherie, P. Villon, A. Ibrahimbegovic, A. Rassineux, P. Breitkopf, ‘Transfer operator based on diffuse interpolation and energy conservation for damage materials’, Proceedings 3rd MIT Conference in Computational Fluid and Solid Mechanics, Boston, June 2005
  301. G. Herve, A. Ibrahimbegovic, P. Villon, ‘Time-space field transfer for impact dynamics’, Proceedings 3rd MIT Conference in Computational Fluid and Solid Mechanics, Boston, June 2005
  302. Ibrahimbegovic, A. ‘Nonlinear shell computations in coupled problems’, IACM-IASS Conference ‘Computations in Shells and Spatial Structures’, Salzburg, Austria, June, 2005
  303. L. Davenne, J.B. Colliat, A. Ibrahimbegovic, A. ‘Thermomechanic coupling in nonlinear shell computations’, IACM-IASS Conference ‘Computations in Shells and Spatial Structures’, Salzburg, Austria, June, 2005
  304. Ibrahimbegovic, A. Kucerova, ‘Nonlinear dynamics of flexible multibody systems undergoing large rotations and control of deployment sequence’, IACM-IASS Conference ‘Computations in Shells and Spatial Structures’, Salzburg, Austria, June, 2005
  305. J.B. Colliat, A. Ibrahimbegovic, H. Matthies, ‘Thermomechanical coupling in structures with inelastic response and operator split solution procedure’, ECCOMAS Conference ‘Coupled Problems’, Santorini, May 2005
  306. Ibrahimbegovic,, D. Markovic, S. Melnyk, ‘Modèles numériques multi-échelles du comportement anélastique des matériaux et leurs applications en analyse non linéaire et en conception optimale’, Actes du 7ème Colloque en calcul des structures, Giens, May 2005
  307. D. Brancherie, P. Villon, A. Ibrahimbegovic, A. Rassineux, P. Breitkopf, ‘Transfert de champ par approximation diffuse avec conservation d’énergie’, Actes du 7ème Colloque en calcul des structures, Giens, May 2005
  308. D. Brancherie, P. Villon, A. Ibrahimbegovic, A. Rassineux, P. Breitkopf, ‘Remeshing strategy for damage materials: a transfer operator based on diffuse interpolation’, Proceedings 8th ESAFORM Conference, Cluj-Napoca, Romania, April 2005
  309. Ibrahimbegovic, ‘Computational algorithms for multiscale modeling of inelastic behavior of material with microstructure: nonlinear analysis and microstructure optimization’, Proceedings GAMM Conference, Luxemburg, March 2005
  310. J.B. Colliat, A. Ibrahimbegovic, L. Davenne, ‘Multi-scale thermomechanical coupling in brittle rupture’, ALERT-2004, Aussois, October 2004
  311. Ibrahimbegovic, D. Markovic, D. Brancherie, ‘The role of structureal mechanics in material analysis and design’, ALERT-2004, Aussois, October 2004
  312. Ibrahimbegovic, J.B. Colliat, L. Davenne, A. Pokrklic, ‘Fire resistance of structures: computational models and applications in urban environement’, Proceedings CURE Conference, Gdansk, Poland, September 2004
  313. Ibrahimbegovic, R.L. Taylor, A. Kucerova, ‘Nonlinear dynamics of large multibody systems and control of deployment sequence’, Proceedings WCCM VI, Beijing, China, September 2004
  314. Ibrahimbegovic, J.B. Colliat, L. Davenne, A. Pokrklic, ‘Thermomechanical coupling and fire resistance of cellular structures’, Proceedings WCCM VI, Beijing, China, September 2004
  315. D. Brancherie, A. Ibrahimbegovic, P. Villon, A. Rassineux, P. Breitkopf, ‘Novel model for material failure of massive structures’, Proceedings WCCM VI, Beijing, China, September 2004
  316. G. Herve, F. Gatuingt, A. Ibrahimbegovic, ‘Numerical solution of smooth impact on a concrete structure by a time-space decomposition’, ECCOMAS 2004, Jyvaskyla, Finlande, July 2004
  317. A. Ibrahimbegovic, ‘On the role of structural mechanics in inelastic material analysis and design’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  318. D. Brancherie, A. Ibrahimbegovic, P. Villon, A. Rasineux, P. Breitkopf, ‘Describing failure of massive structures: a novel approach to incorporate micro-scale and macro-scale dissipative mechanisms’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  319. J.B. Colliat, A. Ibrahimbegovic, L. Davenne, ‘Nonlinear thermomechanical analysis of cellular structures in flat shell context’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  320. Delaplace A., A. Ibrahimbegovic, ‘Recent advances in discrete modeling of dynamic failure of concrete’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  321. N. Dominguez, F. Ragueneau, A. Ibrahimbegovic, ‘Bond-slip effect on crack pattern distribution in reinforced concrete’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  322. G. Hervé, F. Gatuingt, A. Ibrahimbegovic, ‘Equivalent time-space loading analysis for impact problem’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  323. Gresovnik I., D. Markovic, T. Rodic, A. Ibrahimbegovic, ‘Optimization of inclusion shapes in inhomogeneous structural elements’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  324. Kucerova A., A. Ibrahimbegovic, C. Knopf-Lenoir, P. Villon, ‘Optimal design and optimal control of nonlinear structures using genetic algorithms’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  325. D. Markovic, A. Ibrahimbegovic, R. Niekamp, H. Matthies, ‘Parallel algorithm for multi-scale modeling of heterogeneous structures with inelastic constitutive behavior’, Proceedings NATO-ARW, Bled, Slovenia, June 2004
  326. Delaplace A., A. Ibrahimbegovic, ‘Large displacement modeling for dynamic fracture of concrete structure, Proceedings FRAMCOS 5, Vail, Colorado, USA, April 2004
  327. Ibrahimbegovic A., C. Knopf-Lenoir, A. Kucerova, P. Villon, ‘Shape optimization of geometrically exact structures using Hermite diffuse approximation’, ADMOS 2003, Int. Conf. Adaptive Modeling, Geteborg, September 2003
  328. Ibrahimbegovic A., ‘Problèmes de localisation, rupture et couplage thermomécanique en mécanique des solides’, 16ème Congres Français de Mécanique, Nice, September 2003
  329. Codet S., L. Davenne, A. Ibrahimbegovic, P. Sollogoub, R.J. Gibert, ‘Influence de la modélisation dans le comportement anélastique des structures en béton armé’, 16ème Congres Français de Mécanique, Nice, September 2003
  330. Markovic D., A. Ibrahimbegovic, ‘Modélisation multi-échelle de comportement anélastique de structures héteérogènes, 16ème Congres Français de Mécanique, Nice, September 2003
  331. N. Dominguez, F. Ragueneau, A. Ibrahimbegovic, S. Michel-Ponnelle, ‘Modèle d’interface acier-béton, cadre thermodynamique et formulation éléments finis’, 16ème Congres Français de Mécanique, Nice, September 2003
  332. G. Hervé, F. Gatuingt, A. Ibrahimbegovic, ‘Comportement d’une dalle en béton impactée par un projectile en acier de déformatoin variable’, 16ème Congres Français de Mécanique, Nice, September 2003
  333. P. Courtois, A. Ibrahimbegovic, ‘Implantation numérique pour le vecteur de rotation incrémental en coques non linéaires soumises à de grandes rotations’, 16ème Congres Français de Mécanique, Nice, September 2003
  334. P. Courtois, A. Ibrahimbegovic, ‘Vecteur de rotation incrémental pour les coques non linéaires en grandes rotations‘, 16ème Congres Français de Mécanique, Nice, September 2003
  335. Ibrahimbegovic A., A. Delaplace, ‘Discrete model for dynamic fracture of brittle structures’, USNCCM 7th, New Mexico, USA, July 2003
  336. Ibrahimbegovic A., A. Kucerova, C. Knopf-Lenoir, P. Villon, ‘Optimal control and optimal design of structures undergoing large rotations: Theoretical formulation, diffuse approximation response surface and genetic algorithm based solution procedures’, USNCCM 7th, New Mexico, USA, July 2003
  337. Ibrahimbegovic A., D. Markovic, D. Brancherie, ‘Micro-macro modeling of inelastic behavior of heterogeneous structures’, Proceedings 2nd MIT Conference in Computational Fluid and Solid Mechanics, 333-337 (I), Boston, June 2003
  338. Brank B., A. Ibrahimbegovic, ‘On Dynamics and Large Strain Analysis of Shells’, Proceedings 2nd MIT Conference in Computational Fluid and Solid Mechanics, 143-145 (I), Boston, June 2003
  339. Delaplace A., A. Ibrahimbegovic, ‘Discrete analysis of the dynamic behavior of hetergeneous materials’, Proceedings 2nd MIT Conference in Computational Fluid and Solid Mechanics, 225-228 (I), Boston, June 2003
  340. Colliat J.B., A. Ibrahimbegovic, L. Davenne, ‘Modeling themomechanical behavior of cellular structures made of brittle material’, Proceedings 2nd MIT Conference in Computational Fluid and Solid Mechanics, 200-203 (I), Boston, June 2003
  341. Brancherie D., A. Ibrahimbegovic, ‘Modélisation ‘‘macro’’ de phénomènes dissipatifs localisés à l’échelle macro: formulation et implantation numérique’, 6ème Colloque national en calcul des structures, Giens, 41-48 (III), May 2003
  342. Delaplace A., A. Ibrahimbegovic, ‘Analyse dynamique du comportement des matériaux par une approche discrète’, 6ème Colloque national en calcul des structures, Giens, 481-488 (III), May 2003
  343. Gatuingt F., G. Hervé, A. Ibrahimbegovic, ‘Choc sur structure en béton: influence de la raideur d’impacteur sur la réponse structurale’, 6ème Colloque national en calcul des structures, Giens, 141-148 (II), May 2003
  344. Dominguez N., F. Ragueneau, A. Ibrahimbegovic, ‘Bond-slip in reinforced concrete structures, constitutive modeling and finite element implementation’, EURO-C, Zell-am-See, Austria, April 2003
  345. Gatuingt F., G. Hervé, A. Ibrahimbegovic, ‘Local Response of a Concrete Slab Submitted to a Smooth or a Hard Impact’ Proceedings COMPLAS 7: Computational Plasticity, Barcelona, April 2003
  346. Colliat J.B., L. Davenne, A. Ibrahimbegovic, ‘A Model for Brittle Materials in Plate Elements’, Proceedings COMPLAS 7 : Computational Plasticity, Barcelona, April 2003
  347. Ibrahimbegovic A., D. Markovic, D. Brancherie, F. Gatuingt, A. Delaplace, ‘On the Role of the Operator Split in Multifield and Multiscale Modeling of Inelastic Behavior of Structures’, Proceedings MCM2002, LMT-Cachan, Cachan, September 18-20, (2002)
  348. Ibrahimbegovic A., R.L. Taylor, ‘Frame invariance – to rotate or not to rotate : that is the question’, FEM Class of 42, Ibiza, May 30-31, 2002
  349. Casaux G., F. Ragueneau, J. Mazars, A. Ibrahimbegovic, ‘Modélisation du comportement sismiques des structures en béton armé’, Actes du colloque (RF)2B, Cachan, September 24, (2002)
  350. Colliat J.B., L. Davenne, A. Ibrahimbegovic, ‘Modelling of Nonlinear Behavior of Masonary Structures: Phenomenological Approach’, Proceedings Engineering Computational Technology ECT-2002, (eds. B.H. Topping, Z. Bittnar), September 4-6, (2002)
  351. Brancherie D., A. Delaplace, A. Ibrahimbegovic, ‘Formulation and Finite Element Implementation of Continuum/Discrete Strain Softening’, Proceedings World Congress on Computational Mechanics WCCM5, (eds. H. Mang et al.), Vienna, July 8-12, (2002)
  352. Markovic D., F. Gatuingt, A. Ibrahimbegovic, ‘A New Look at Cap Model: Formulation and Finite Element Implementation’, Proceedings World Congress on Computational Mechanics WCCM5, (eds. H. Mang et al.), Vienna, July 8-12, (2002)
  353. Brank B., J. Korelc, A. Ibrahimbegovic, ‘Shell Element with Through-the-Thickness Stretching’, Proceedings World Congress on Computational Mechanics WCCM5, (eds. H. Mang et al.), Vienna, July 8-12, (2002)
  354. Casaux G., F. Ragueneau, J. Mazars, A. Ibrahimbegovic, ‘Modélisation du comportement 3D des structures en béton armé sous sollicitations sismiques transitoires’, Actes du colloque AFGCE, Toulouse, (2002)
  355. Delaplace A., A. Ibrahimbegovic, ‘Discrete Modelling of Cracking of Brittle Materials in Large Relative Motion and Localization Problems’, Proceedings IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, (ed. C. Miehe), Stuttgart, August 20-24, (2001)
  356. Ragueneau F., J. Mazars, A. Ibrahimbegovic, ‘Computation of Reinforced Concrete Structures under Seismic Loading: Local Behavior and Efficient Numerical Tools’, Proceedings Workshop ‘Mitigation of Seismic Risk’, (ed. M. Geradin), Ispra, November 27-28, (2001)
  357. Brancherie D., A. Ibrahimbegovic, ‘Inelastic Model Combining Distributed Micro-Cracking and Macro-Cracking Induced by Strain Softening’, Proceedings FraMCoS-4 Fourth International Conference on Fracture Mechanics of Concrete and Concrete Structures, May 29-June 2, (2001)
  358. Ibrahimbegovic A., ‘Nonlinear Dynamics of Complex Flexible Multibody Systems Undergoing Large Overall Motion’, Proceedings EUROMECH-427, (eds. A. Ibrahimbegovic, W. Schiehlen), Cachan, September 24-27, (2001)
  359. Brank B., A. Ibrahimbegovic ‘On Dynamics of Shells with Rotations’, Proceedings EUROMECH-427, (eds. A. Ibrahimbegovic, W. Schiehlen), Cachan, September 24-27, (2001)
  360. Ibrahimbegovic A., ‘Instability of Structures in Large Rotations’, Proceedings EUROMECH-424, (eds. J. Arbocz, W. Wunderlich), Kerkrade, The Netherlands, September 3-5, (2001)
  361. Ibrahimbegovic A., C. Knopf-Lenoir, ‘Optimisation de forme par l’approche simoultanée pour des poutres non linéaire’, Actes du 5ème colloque national en calcul des structures, Giens, 1033-1040, (2001)
  362. Ibrahimbegovic A., L. Chorfi, ‘Couplage thermomécanique en grandes déformations viscoplastiques et le problème de localisation’, Actes du 5ème colloque national en calcul des structures, Giens, 837-844, (2001)
  363. Ibrahimbegovic A., S. Mamouri, B. Brank, ‘Finite Rotation Shell Element for Nonlinear Statics and Dynamics, Proceedings ECCOMAS 2000 European Congress on Computational Methods in Applied Science and Engineering, Barcelona, (2000)
  364. Brank B., A. Ibrahimbegovic, S. Mamouri, ‘Nonlinear Static and Dynamics Analysis of Shells by Singularity-Free Finite Rotation’, Proceedings 4th EUROMECH Solid Mechanics Conference, Metz, (2000)
  365. Brank B., A. Ibrahimbegovic, S. Mamouri, ‘Finite Rotations in Computational Mechanics of Shell Structures’, Proceedings ICES 2000 Int. Conference on Computational Engineering Science, Los Angeles, (2000)
  366. Ibrahimbegovic A., S. Mamouri, Dynamics of Complex Flexible Multibody Systems Undergoing Large Overall Motion, Proceedings NATO ARW Computational Aspects of Nonlinear Structural Systems With Large Rigid Body Motion, Pultusk, Poland, (2000)
  367. Ibrahimbegovic A., ‘Shell Structures Undergoing Large Rotations’, Proceedings IASS-IACM 2000 Computation of Shell & Spatial Structures, Chania-Crete, Greece, (2000)
  368. Brank B., A. Ibrahimbegovic, S. Mamouri, ‘Finite Rotation Shell Element for Nonlinear Static and Dynamics Analysis’, Proceedings IASS-IACM 2000 Computation of Shell & Spatial Structures, Chania-Crete, Greece, (2000)
  369. Ibrahimbegovic A., F. Gharzeddine, L. Chorfi, ‘Method of Incompatible Modes for Finite Deformation Bending Dominated and Quasi-Incompressible Elasticity’, Proceedings of European Conference on Computational Mechanics, ECCM’99, Munich, (1999)
  370. Ibrahimbegovic A., S. Mamouri, ‘Nonlinear Dynamics of Flexible Multibody Systems and Energy-Conserving Integration Schemes’, Proceedings of European Conference on Computational Mechanics, ECCM’99, Munich, (1999)
  371. Brank B., A. Ibrahimbegovic, P. Courtois, ‘Nonlinear Shell Elements for Finite Rotations and Large Plastic Deformations’, Proceedings of European Conference on Computational Mechanics, ECCM’99, Munich, (1999)
  372. Brank B., A. Ibrahimbegovic, ‘Rotational Parameters in Smooth Shell Mechanics: Exponential Mapping and Rodrigues Formula’, Proceedings of Slovenian Conference on Mechanics, Kuhljevi dnevi ’99, Dvorec Zemono, (1999)
  373. Gharzeddine F., A. Ibrahimbegovic, L. Chorfi, A. Gakwaya, ‘Formulation des théories de la plasticité et de la viscoplasticité en grandes déformations dans les axes principaux’, Actes du 4e Colloque National en Calcul des Structures, Giens, (1999)
  374. Mamouri S., A. Ibrahimbegovic, ‘Dynamique non linéaire des systèmes multicorps et schéma d’intégration temporelle des équations raides’, Actes du 4e Colloque National en Calcul des Structures, Giens, (1999)
  375. Chorfi L, M. Rachik, Ibrahimbegovic A., ‘Schémas d’integration temporelle en viscoplasticité’, Actes du 4e Colloque National en Calcul des Structures, Giens, (1999)
  376. Ibrahimbegovic A., F. Gharzeddine, ‘Efficient Implementation of Incompatible Mode Method in Large Strain Problems’, Proceedings of Int. Conference on Computational Engineering Science (ICES’98), Atlanta, USA (1998)
  377. Ibrahimbegovic A., S. Mamouri, ‘Finite Rotations in Statics and Dynamics’, Proceedings of Int. Conference on Computational Engineering Science (ICES’98), Atlanta, USA (1998)
  378. Ibrahimbegovic A., P. Courtois, ‘An Intrinsic Form of Geometrically Exact Shell Theory’, Proceedings of Int. Conference on Computational Engineering Science (ICES’98), Atlanta, USA (1998)
  379. Ibrahimbegovic A., ‘Finite Rotations in Nonlinear Dynamics’, Proceedings of the Fourth World Congress on Computational Mechanics (WCCM IV), Buenos Aires, Argentina (1998)
  380. Ibrahimbegovic A., S. Mamouri, ‘Nonlinear Dynamics of Flexible Beams Governed by the Stiff Differential Equations’, Proceedings of the Fourth World Congress on Computational Mechanics (WCCM IV), Buenos Aires, Argentina (1998)
  381. Rachik M., A. Ibrahimbegovic, ‘A Solution Method for Nonlinear Problems with Contact’, Proceedings of the Fourth World Congress on Computational Mechanics (WCCM IV), Buenos Aires, Argentina (1998)
  382. Ibrahimbegovic A., F. Gharzeddine, ‘On Implementation of Finite Deformation Elastoplasticity, Proceedings 2nd South African Conference on Applied Mechanics (SACAM’98), Cape Town, South Africa, 389-396 (1998)
  383. Ibrahimbegovic A., P. Courtois, ‘Coque géométriquement exacte et son implantation numérique’, Actes du 13ème Congrès Français de Mécanique, Potiers FUTUROSCOPE, 185-188 (1997)
  384. Ibrahimbegovic A., M. Al Mikdad, ‘Un schéma d’intégration en dynamique des poutres soumises aux grandes rotations, Actes du 3ème Colloque National en Calcul des Structures, Giens, 125-130 (1997)
  385. Ibrahimbegovic A., F. Gharzeddine, ‘Une nouvelle implantation numérique de l’élasto-plasticité en transformations finies, Actes du 3ème Colloque National en Calcul des Structures, Giens, 381-386 (1997)
  386. Ibrahimbegovic A., ‘A Finite Element Technology Contribution Towards Efficient Solution of 3d Nonlinear Problems, Proceedings EUROMECH 371 Efficient and Reliable Continuum Finite Elements for Linear and Nonlinear Analysis, (eds. K. Schweizerhoff et al.), Bad Herrenalb, 17, (1997)
  387. Ibrahimbegovic A., ‘Covariant Formulation for Phenomenological Model of Plasticity in Principal Axes, Proceedings 4th US Congress on Computational Mechanics, San Francisco, 289 (1997)
  388. Ibrahimbegovic A., F. Gharzeddine, ‘Covariant Formulation of Finite Deformation Elastoplasticity in Principal Axes’, XIXth Int. Congress Theor. Appl. Mechanics (IUTAM), Kyoto, Japan, 76 (1996)
  389. Ibrahimbegovic A., M. Al Mikdad, ‘On Dynamics of Finite Rotations of 3d Beams’, ECCOMAS’96, (eds. P. Le Tallec et J. Périaux), Paris, 447-453 (1996)
  390. Ibrahimbegovic A., ‘An Intrinsic Form of the Stress Resultant Geometrically Exact Shell Theory’, Summer Seminar of Canadian Math. Society, (eds. M. Fortin et al.), Quebec, 381-386 (1996)
  391. Ibrahimbegovic A., ‘The Method of Incompatible Modes in Nonlinear Analysis of Solids and Structures’, Proceedings of the Third US National Congress on Computational Mechanics, (ed. J.N. Reddy), Dallas, Texas, 369, (1995)
  392. Ibrahimbegovic A., ‘Computational Issues of the Finite Deformation Elastoplasticity on a Manifold’, Proceeding 4th International Conference on Computational Plasticity, (eds. D.R.J. Owen et al.), Barcelona, 107-118, (1995)
  393. Ibrahimbegovic A., ‘Finite Elastoplastic Deformations of Membrane Shells’, Int. Conference on Metal Forming Process Simulation in Industry, (ed. B. Kroplin), Baden-Baden, Germany, 94-113, (1994)
  394. Ibrahimbegovic A., F. Frey, ‘A Consistently Linearized Shell Theory and Its FE Implementation’, Proceedings of III World Congress on Comp. Mech., (eds. T. Kawaii et al.), Chiba, Japan, 1232, (1994)
  395. Ibrahimbegovic A., ‘Finite Elastoplastic Deformations of Membrane Shells’, Proceedings of III World Congress on Comp. Mech., (eds. T. Kawaii et al.), Chiba, Japan, 380, (1994)
  396. Kozar I., A. Ibrahimbegovic, ‘New Finite-Rotation Solid Element’, Proceedings of the First Congress of the Croatian Mechanics Society, 211-219, (1994)
  397. Ibrahimbegovic A., F. Frey, ‘An Efficient Approach to Serviceability Analysis and Ultimate Load Design of Reinforced Concrete Plates’, Proceedings of the EUROC-94 Conference, (ed. H. Mang et al.), Innsbruck, Austria, 875-884, (1994)
  398. Ibrahimbegovic A., F. Frey, ‘Stress Resultant Geometrically Nonlinear Shell Theory with Drilling Rotations’, Proceedings of the Second US National Congress on Computational Mechanics, (ed. A.K. Noor), Washington, D.C. 188, (1993)
  399. Ibrahimbegovic A., F. Frey, ‘Geometrically Nonlinear Shell Theory with Drilling Rotations: A Consistent Formulation and Computational Aspects’, Proceedings of the European Mechanics Colloquium EUROMECH 292, (ed. W. Wunderlich), Munich, 6, 1-4, (1992)
  400. Ibrahimbegovic A., F. Frey, ‘Stress Resultants Elasto-Plastic Analysis of Plates and Shallow Shells’, Proceeding 3rd International Conference on Computational Plasticity, (eds. D.R.J. Owen et al.), Barcelona, 2047-2060, (1992)
  401. Frey F., A. Ibrahimbegovic, A. Camacho-Hubner, ‘On Locking Phenomena in Finite Element Analysis of Planar Deformation of Beams’, Proceedings of the First European Conference in Numerical Methods in Engineering, (eds. Ch. Hirsch, O.C. Zienkiewicz and E. Onate), Brussels, 563-570, (1992)
  402. Ibrahimbegovic A., E.L. Wilson, ‘Efficient Solution Procedures for Static and Dynamic Analysis of Linear Systems with Localized Nonlinear Behavior’, Proceedings of the 4th International Conference on Nonlinear Engineering Computations, Swansea, 61-70, (1991)
  403. Ibrahimbegovic A., E.L. Wilson, ‘A Unified Computational Model for Static and Dynamic Frictional Contact Analysis’, Proceeding of the Second World Congress on Computational Mechanics, Stuttgart, W. Germany, 804-807, (1990)
  404. Ibrahimbegovic A., E.L. Wilson, ‘An Efficient Computational Framework for Nonlinear Dynamic Analysis of Base-Isolated Structures’, Proceedings 9th European Conference in Earthquake Engineering, Moscow, (1990)
  405. Ibrahimbegovic A., B. Verbic, ‘In-Plane Stiffness Evaluation for Prefabricated Concrete Slabs’, Proceedings 8th European Conference in Earthquake Engineering, Lisabon, (1986)

Copyright © 2024 · All Rights Reserved · Ibrahimbegovic Adnan · Portfolio Theme Lite by Organic Themes